bosch m100 9,10,11mm by model numbers?? May 02, 2014 10:50AM
We put a 466 into our 766 after 360 took a crap. We took reman pump off 766 and put onto new motor after we had it checked. Man at pump shop told us it was 10mm pump but our 1066 with 414 will run circles around the 766 with 466. I juat wanted to know if there was a list to compare model numbers and"cust part num" to tell if the pump is 9mm or 10mm. 6A100A9298-5R and 684 451 C92 are numbers from pump. Thanks for any help
Reply Quote

Re: bosch m100 9,10,11mm by model numbers?? May 02, 2014 12:01PM
probably not a 9 mm.not many 9 mm heads left. most use 10 mm.the stop plate and nose cam angle along with droop screw determine the amount of fuel injected.
Reply Quote

Re: bosch m100 9,10,11mm by model numbers?? May 02, 2014 01:35PM
it is a 10mm. where it says.. 100 means 10mm if it were a 9mm it would read 90 or 120 would be a 12mm and so on.. hope this helps
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,780, Posts: 229,958, Members: 3,338.
This forum: Topics: 37,099, Posts: 226,041.

Our newest member Jacklovik2009