466 motor issues May 27, 2014 06:43AM
at the end of a pull last year . my tractor lugged way down then started missing. it was putting raw fuel out exhaust manifold. and if you tryed pushing throttle a head fast it would like flood out. but if you went slow it would wind up. i tryed pulling and no power. tryed different pump. had injectors checked. any thoughts.? thought timing was off. checked all that. crank gear seems to be in the same spot.

Re: 466 motor issues May 27, 2014 08:37AM
Bent push rods

Re: 466 motor issues May 28, 2014 02:02AM
no they seem fine.

Re: 466 motor issues May 28, 2014 02:36AM
Pull the head, Check your Valves.

Re: 466 motor issues May 28, 2014 04:45AM
i did i do have cracks between valves. it is a stock head. ive never touched it.

Re: 466 motor issues May 29, 2014 01:28AM
Sounds like you might have a couple of spun bearings.

Re: 466 motor issues May 29, 2014 02:02AM
my motor would nock if the bearings spun right?

Re: 466 motor issues May 29, 2014 12:47PM
no ,not always. either bearings or scored cylinder walls.

Re: 466 motor issues May 30, 2014 12:31AM
Compression test

Re: 466 motor issues May 30, 2014 02:04AM
thanks for all the in put really appreciate it. ill look at it this weekend.

Re: 466 motor issues May 30, 2014 02:59AM
If you are running a stock head are the valves stock? Your valves maybe warped. If you are running with a lot of heat you may have valves that are not sealing.

Re: 466 motor issues May 30, 2014 04:35AM
yes they are stock.

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,724, Posts: 229,854, Members: 3,330.
This forum: Topics: 37,084, Posts: 225,979.

Our newest member LT Limited Pro