07:55:19pm, Thursday, May 16, 2024
Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
This year I put cut tires on 20.8 firestones they are at there end in rubber and are pretty thin. all year if I get on a hard hooking track it bounces im running at 16 lbs am I wrong on air pressure or should I try something else. thanks for the input |
Re: Tractor bounce
|
Registered: 11/22/2008 Posts: 181 |
Not the best answer, but u can't bounce a flat basketball. Worth a try taking some air out I guess? |
Re: Tractor bounce
|
Registered: 09/09/2009 Posts: 140 |
Have never ran cut tires but we used to have that problem. We increased pressure slowly until bounce went away. Effectively taking away unnecessary side wall flex. |
Re: Tractor bounce
|
Asking
|
Would adding more tire pressure take away traction to let tires spins easier? |
Re: Tractor bounce
|
Peter Rabit
|
Bouncing is caused by a few different things. would have to see a video to adress corectly. Driving, track conditions, weighting, and tire pressure are all posibilities or a combination of them. |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
Its a stock frame I'm front heavy weighing 9500-9800 tires flex hard as I bounce I ride clutch out till I'm rolling and dump it tracks it does it on are hard tracks black dirt or clay |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
I'll attach a video later |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
[www.youtube.com]
This one does it as im letting clutch out this past weekend clutch was out before bounce and it carried the hole way |
Re: Tractor bounce
|
Registered: 04/06/2008 Posts: 263 |
With bounce that early in the run it's most likely your clutch slipping and nothing your going to do with you tire psi will really fix that. What are you running for a clutch? Straight shaft or T/A? |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
Atlas sfi 2 disc 22 passes since freshened it has a ta but it locked in height I don't shift |
Re: Tractor bounce
|
I would agree on clutch. What is the chance that the throw out bearing isn't allowing the clutch to fully engage? |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
I'll check it tonight |
Re: Tractor bounce
|
Peter Rabit
|
Yep, definetly something going on in clutch. Once it bounced once and your foot is still on pedal, you are only making it worse cause your pushing the clutch back in at every bounce. I'd try side stepping that prick once the chains tight and you've got boost. |
Re: Tractor bounce
|
Big hole
|
Dropping a gear wouldn't hurt. |
Re: Tractor bounce
|
keyboard puller
|
Just an observation, but that sled doesn't look like it takes off very easy from the line on that video, that's probably not helping your clutching/bouncing problem. |
Re: Tractor bounce
|
Registered: 08/14/2013 Posts: 203 |
I agree clutch. How many runs on it. |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
22 runs on clutch and a straight shaft is on my bench for winter project I appreciate allbthe help |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
Its not just that sled its Bauer sled track patrol all of them |
Re: Tractor bounce
|
Tire guy
|
It's your clutch |
Re: Tractor bounce
|
Registered: 04/06/2008 Posts: 263 |
A 2 disk clutch isn't going to hold if your making the power you should with that setup. And just cuz you don't shift your TA doesn't mean that it's not going to slip.
Been there broke that... |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
What will a two disk be good for dairy blend outta curiosity |
Re: Tractor bounce
|
Registered: 01/19/2010 Posts: 105 |
About all a 2 disk is good for anymore is farmstock, anything hotter you won't get much life out of it. I'll say it is your clutch too, what disks are you running, buttons or Crower (sintered iron)? Depending on your 2 disk from Atlas you may be able to add a 3rd disk to it, call Karl and see what he can do for you. |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
Pretty sure its button not 100% and yes if I change stands I can go to 3 disc but my housing is not ground out for it |
Re: Tractor bounce
|
Check your clutch plate for warpage bet that's the culprit? Slipping clutch makes it worse. |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
They r crower |
Re: Tractor bounce
|
Just wandering if you still have the slave cylinder on? if you do take it off same thing happened to a guy I know |
Re: Tractor bounce
|
Registered: 03/17/2009 Posts: 464 |
No slave |
Website Statistics
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.
Our newest member Jacklovik2009