Need some help on a case 504 September 29, 2014 01:53AM
What is a good set for stock/hot farm pulling. Have a 10mm a pump with cut deliver valve, 3lm special, 5x25 inj, vogle cam, a little head work, 34 degrees of timing and .93 lines run ok want more out of the tractor.

Re: Need some help on a case 504 October 11, 2014 02:33AM
not sure what your rules allow, but a 3x3 charger, flowed heads, and a 11 or 13mm pump will make light it up. Water inj as well

Re: Need some help on a case 504 October 11, 2014 03:18AM
Be sure to have a steel flywheel and pressure plate before you plan to make any power,lawsuits are very expesive,
as far as power,the sky and check book is the limit,hope it runs good for you,not to many Case guys out there!

Re: Need some help on a case 504 October 13, 2014 02:42AM
3X3 turbo, 13mm pump and no water are the rules.

Re: Need some help on a case 504 October 12, 2014 04:41AM
what are your class rules? that would be nice to know before dishing out a bunch of advice. one problem with your current setup is the injectors are to big for the pump you have, you need a bigger pump & probably 5- .022 injectors.

Re: Need some help on a case 504 October 12, 2014 05:51AM
get S300 turbo and different pump setup

Re: Need some help on a case 504 October 13, 2014 10:22AM
Power shift or eight speed trany

Re: Need some help on a case 504 October 13, 2014 11:59AM
Give Brian Scott a call, Prarie Performance 660 483 0576.

Re: Need some help on a case 504 October 13, 2014 02:04PM
I have a good 13mm p pump for a case and other case parts 660-909-8982

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.

Our newest member Jacklovik2009