water injection nozzels December 27, 2014 03:12AM
Were can i get water injection nozzels. I would like something easy to change tips . Putting one at exit turbo and three at intake. Running intercooler 3by4 charger p-pump
Reply Quote

Re: water injection nozzels December 27, 2014 05:31AM
[goodvibesracing.com]
Reply Quote

Re: water injection nozzels December 28, 2014 03:20PM
Max Simpson at Simpson Performance good to deal with reasonable price
Reply Quote

Re: water injection nozzels December 28, 2014 04:06PM
As Big Block Deere showed they are very easy to install and change.
Reply Quote

Re: water injection nozzels December 29, 2014 03:15AM
What style of enderle nozzle holders are guys using? Hat or blower port?
Reply Quote

Re: water injection nozzels December 29, 2014 03:40PM
Port

cannot use the hat style

there are different length bodies you can get

buy an assortment of nozzles

25 up to 45

depending upon how many you will be using
Reply Quote

Re: water injection nozzels December 30, 2014 01:01PM
I am confused--I didn't know there were different nozzles for hat or port injection. What is the difference?? JW
Reply Quote

Re: water injection nozzels December 31, 2014 01:23AM
I have never purchased the hat style.
Based upon the picture there is a hole in the body.
Won't work loose boost.
but I could be all wrong.
Reply Quote

Re: water injection nozzels December 31, 2014 05:25PM
We are using the enderle nozzles from good vibes. Best price and quick shipping. I suggest getting some smaller sizes depending on your engine. We started big and drowned out the motor. Ended up using the smallest tips and only using 3 lines rather than 6.
Reply Quote

Re: water injection nozzels January 01, 2015 12:16AM
what size( number) did you end up with. how much pump pressure and how many oz did you get
Reply Quote

Re: water injection nozzels January 01, 2015 01:19AM
On most we have put together.
3x3 turbos.
3 nozzles with 28-34 sizes at 800 psi 36 to 40 Oz

every engine is different some like more some like less
Reply Quote

Re: water injection nozzels January 01, 2015 11:01AM
Are guys running port Inj with a cooler or just intake pipe nozzles.
What's an approx amount of water for an Intercooled 504, 750cc, 3x3 turbo open rpm
Reply Quote

Re: water injection nozzels January 01, 2015 11:27AM
No port

I can't help you with the estimate on your usage sorry
Reply Quote

Re: water injection nozzels January 01, 2015 09:59PM
app 30 ozs. in 15 seconds.
Reply Quote

Re: water injection nozzels January 04, 2015 09:46AM
thanks for all the info
Reply Quote

Re: water injection nozzels January 04, 2015 03:15PM
Buy them small. You can always drill them out.
Reply Quote

Re: water injection nozzels January 04, 2015 03:43PM
I've never had good luck drilling them out. That stream of fluid need to come strait out of the jet in order for it to hit the flat part of the tip and make a nice spray pattern. The ones I've drilled seemed to shoot off to the side kind of like peeing down your leg. Smiling
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,641, Posts: 229,707, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.

Our newest member JD_8520