01:00:56pm, Wednesday, May 15, 2024
560 rear end with 450 ring and pinion
|
Ummm??
|
What percent will it speed a 560 rear end with a 450 ring and pinion? Basiclly a half gear? |
Re: 560 rear end with 450 ring and pinion
|
Supertiquer
|
You will speed it up about 19.5%. |
Re: 560 rear end with 450 ring and pinion
|
Registered: 09/03/2010 Posts: 393 |
You go from a 3.26 (560) to a 2.63 (450/400) R/P ratio. I don't know and never have firgued the % but I do know the ratio. That is the standard R/P and there are others but I don't know them and have not firgued them |
Re: 560 rear end with 450 ring and pinion
|
you run?
|
have you run one of these farmall puller or running one now?
what about a set of faster constant mesh gears and this 450 ring and pinion looking for half gears |
Re: 560 rear end with 450 ring and pinion
|
Registered: 09/03/2010 Posts: 393 |
Ran a 450 set up for a while with a home built set of transmission gears then changed to a faster set of constant mesh gears with the 560 R/P. Not sure what you are calling half gears but the ratios we have now are 18-1, 19-1, and I believe around 21-1/22-1. Stock road gear is 18-1 if that helps you any. Is this in a Profield , LLS, or Prostock? I,m running this in a Profield, 3000 rpm, 18.4-38's, 360 cu,no turbo or pump limits. Edited 2 time(s). Last edit at 01/25/2015 02:33PM by farmall puller. |
Re: 560 rear end with 450 ring and pinion
|
560 joe bob
|
how many ring & pinion setup are their for a 560 |
Re: 560 rear end with 450 ring and pinion
|
Supertiquer
|
There are 3 that I know of. 15/49 out of a 560. 19/50 out of an M or 450. 19/47 out of a 450 hi-clear. There may even be one that will work out of a 660 but I can't remember for sure. |
Re: 560 rear end with 450 ring and pinion
|
Registered: 09/03/2010 Posts: 393 |
There is one that will work out of a 660 but I do not know the ratio's. |
Re: 560 rear end with 450 ring and pinion
|
red puller
|
there one out a 560 utitily |
Re: 560 rear end with 450 ring and pinion
|
No such thing
|
No such thing as 560 utility but there was a 560 standard, not sure of ratio though |
Re: 560 rear end with 450 ring and pinion
|
Registered: 05/04/2014 Posts: 19 |
Where could you find a 19/47 ring and pinion? |
Website Statistics
Global: Topics: 38,760, Posts: 229,921, Members: 3,337.
This forum: Topics: 37,094, Posts: 226,019.
Global: Topics: 38,760, Posts: 229,921, Members: 3,337.
This forum: Topics: 37,094, Posts: 226,019.
Our newest member DANNY.WAINSCOTT@YAHOO.COM