Model 100 June 20, 2015 12:43AM
Got a "farm stock" binder and am looking for a good model 100 to run "farm stock/2 hot" with and wondering who has a good pump with a good fast governor and can push a fair amount of fuel ?
Reply Quote

Re: Model 100 June 20, 2015 05:25AM
Harts. No complaints here. They are always there for service and advice! Probably not much wrong with a Scheid pump either though.
Reply Quote

Re: Model 100 June 20, 2015 06:57AM
I can build you a pump which will deliver over 500 cc,s fuel. very fast proprietary gov. all work done in house. 13 mm. plunger 5 mm camshaft , 2900.00 proven performance ..m8888ja@yahoo.com
Reply Quote

Re: Model 100 June 20, 2015 01:49PM
anyone got any opinions on this m8888ja's pumps ? do they work good and are they reliable ?
Reply Quote

Re: Model 100 June 20, 2015 02:01PM
A friend of mine got a pump from him. Said it came off the line and pulled great, but broke the cam in the pump. The guy apologized and fixed the pump right away, and said that the cam was an experimental grind, and wasnt intended to be installed in a customer pump. Sounds like great customer service anyways. My 500+cc high lift 13 mm model 100 was just done by Brian at Prarie Performance in Missouri. Very good communication, but cannot recommend his pump yet because it hasnt proven itself. I will know a lot more in a week or two.



Edited 1 time(s). Last edit at 06/20/2015 02:03PM by neilsroom.
Reply Quote

Re: Model 100 June 20, 2015 02:44PM
Bryan at prairie performance is a very good choice.
I wouldn't go anywhere else!
Reply Quote

Re: Model 100 June 20, 2015 11:22PM
Have dealt with Harts and Brian, both have excellent service and will answer the phone.
Reply Quote

Re: Model 100 June 22, 2015 12:34PM
Had to poke and prod to get the pump fixed and after a long wait and no returned phone calls I finally got a pump back that still didn't work right. Had to call from a different phone number since he was ignoring my calls. Do yourself a favor and cut out the headache and go to Harts! Wish I would of!!
Reply Quote

Re: Model 100 June 22, 2015 03:55PM
Highly recommend Brian. Top notch work, very clean shop, and very honest.
Reply Quote

Re: Model 100 June 23, 2015 08:18AM
Had a harts was a good pump. Bought a new 13mm 550cc from Fvp went from 4th to 1st place and from 3rd gear to changing my gear ratio to over road gear you decide
Reply Quote

Re: Model 100 June 24, 2015 11:15AM
Anyone ever have any luck with a 100 pump from st joe ?
Reply Quote

Re: Model 100 June 24, 2015 02:41PM
I Tried one of those stroker pumps that St joe builds....it lasted 100 feet. I sent it back to get fixed and never saw it again.
Reply Quote

Re: Model 100 June 25, 2015 09:55PM
FVP is hands down where I would go again...not saying nobody else makes a good pump but fair valley did my injectors pump and lines and look out it's a lethal combo and they were right on it when I needed help on the phone.... Good luck
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,641, Posts: 229,707, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.

Our newest member JD_8520