10:00:18pm, Saturday, May 18, 2024
HX35 on a 4430
|
Registered: 04/22/2015 Posts: 63 |
Is it possible? i heard once you can't cause it will hit the water manifold. Is there any way to deal with that? What is the best charger to run in a farm class if a holset won't fit? |
Re: HX35 on a 4430
|
Registered: 04/22/2015 Posts: 63 |
Nobody Knows? |
Re: HX35 on a 4430
|
billy john
|
Put an HX50 with a really tight exhaust housing housing on it and let er go. |
Re: HX35 on a 4430
|
deere09
|
Find the turbo you want and make it work. We just changed the water manifold. You can cut and re-weld it, or put flexible hoses on or change the location you are taking the water from. |
Re: HX35 on a 4430
|
Anonymous User
|
Take the water manifold off and machine the bottom were it bolts to the head on an angle and lean it out of the way.no problem bolting on an hx 50 then. |
Re: HX35 on a 4430
|
Registered: 04/22/2015 Posts: 63 |
Got a picture? I only need to get an HX35 on, i don't know if ill need to machine it or just grind it |
Re: HX35 on a 4430
|
Anonymous User
|
I ground mine,but you have to be precise if you are going to grind them. I dont have a picture now,its been a few years ago. It will work and its not hard just take your time. |
Website Statistics
Global: Topics: 38,779, Posts: 229,954, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,037.
Global: Topics: 38,779, Posts: 229,954, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,037.
Our newest member Jacklovik2009