Case LLSS Chassis? August 31, 2015 12:44AM
I'm curious as to what tractor model I could use from Case for a light limited super stock. Would I be able to get a rear end and chassis light enough to make the weight? Any input would be appreciated.
Reply Quote

Re: Case LLSS Chassis? August 31, 2015 01:13AM
I am in the process of building one and I am starting with a 401B rear and trans. Should be able to interchange 30 series parts that are fairly abundant and the housings are a little lighter. I am anticipating weighing in at 52-5500 lbs when I am done.

Greene's out of MO use a 930 (I think) and they make 6500 in Gordyville with plenty of moveable weight.
Reply Quote

Re: Case LLSS Chassis? August 31, 2015 04:37AM
Thanks I was curious about using the 930 rear end when 6000 is the usual weight limit. What are you doing as far as engines?
Reply Quote

Re: Case LLSS Chassis? August 31, 2015 04:49AM
336 on alcohol.
Reply Quote

Re: Case LLSS Chassis? September 01, 2015 12:10AM
I am thinking about running a 451 bored to 470 diesel. Unfortunately I don't know much about the Case engines smaller than the 401 to really know what my options would be for alcohol.
Reply Quote

Re: Case LLSS Chassis? September 01, 2015 01:33AM
All of the six cylinders 377 to 504 have 5in. stroke and just make bore changes for the cubes.

I feel that an issue with the Case it the small bore causes valve shrouding and air issues. I was thinking about diesel with 6cylinders by doing some de-stroking and using the bigger bore. I know some guys will scoff at taking stroke away due to torque loss but I think that the stroke is no good if you can't get quality air.

Just my opinion.
Reply Quote

Re: Case LLSS Chassis? September 01, 2015 03:25AM
5.9 Cummins was in a Case.
Reply Quote

Re: Case LLSS Chassis? September 01, 2015 01:30PM
aaron 606, just go buy the winner from Langford, NY. Larry & Donna Wright's Case "American Beauty" from Kentucky laid down a phenomenal pass with the 470 cubed diesel. I have seen this tractor pull previously in Kentucky. It is a genuine top notch pulling tractor. The Wright's are very personable and they have the tractor for sale. However, I do not have contact info for them.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,777, Posts: 229,949, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,034.

Our newest member Jacklovik2009