Turbo on a 466 January 11, 2016 08:42AM
Building a IH 466 planing to use top of the line fuel system and engine parts woundering how big of a turbo it can spin with open rpms and what kind of hp can one make???
Reply Quote

Re: Turbo on a 466 January 11, 2016 09:14AM
It all depends on what class and club your going to pull with. Figure that out and check the rules for what they recommend.

Harts has good turbos and FVP has some good stuff too
Reply Quote

Re: Turbo on a 466 January 11, 2016 09:20AM
I can run as large as The motor will turn how big will on turn
Reply Quote

Re: Turbo on a 466 January 11, 2016 09:36PM
??? Any help
Reply Quote

Re: Turbo on a 466 January 12, 2016 12:32AM
3x4 if you have the right combination. Just put a harts 3x3 on it and you'll like it
Reply Quote

Re: Turbo on a 466 January 12, 2016 02:59AM
at what weight?

also it will depend on who's top of the line engine parts you use. Some build for high rpm which you will need for a big charger. some build for low end torque which will require a smaller charger such as the previously mentioned harts 3x3
Reply Quote

Re: Turbo on a 466 January 12, 2016 02:53AM
We had a CDS billet wheel 4.1 with G trim exhaust on our 441 and spun it without any troubles. I've got a CDS 3.9 billet wheel F trim exhaust that would work good on your 466 also, it's for sale if your interested
Reply Quote

Re: Turbo on a 466 January 12, 2016 03:29AM
I got a Columbus billet wheel HX 60 3.2x3.6 for sale that would work good for you give me a call 812-653-0675
Reply Quote

Re: Turbo on a 466 January 12, 2016 04:32AM
8000 lbs who builds the best high rpm parts
Reply Quote

Re: Turbo on a 466 January 12, 2016 12:18PM
3.9 g trim no problem
Reply Quote

Re: Turbo on a 466 January 13, 2016 09:33AM
I have a 3x3 Columbus that would work for u $2000obo. (419)-722-492three. Call or text for more pics and info.


Reply Quote

Re: Turbo on a 466 January 12, 2016 05:17AM
Whose fuel system are you going to use? A Harts 3x4 or a 3x3 would be good for higher RPM's but i dont think it would be good to do much bigger then the 3x4. A 4.1 turbo would be a little to big unless your going to add Cubic Inches. Alot of clubs run a 3x3 for 3000 RPM limits.
Reply Quote

Re: Turbo on a 466 January 14, 2016 02:31AM
This is a pretty loaded question, because you can go from 3x3 up to a 5.5 inch single turbo no problem. Hp is anywhere from 1200 hp to 3000 hp maybe a little more. So you need to know your class rules, and your budget.
Reply Quote

Re: Turbo on a 466 January 14, 2016 12:04PM
Id like to see a 466 spin a 5.5 turbo!that'd be impressive!
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,778, Posts: 229,951, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,035.

Our newest member Jacklovik2009