05:22:01pm, Sunday, May 05, 2024
IH DT-407 ARP Rod Bolts
|
1256HF
|
Hello, I am looking for information on the availability of ARP rod bolts for 407 rods. I understand that the 400 series bolts (pn 6AR2.500) will work with 1/4 of an inch cut off, but I wanted to make sure before I order that there are no shorter bolts readily available from ARP. It seems like you could ask for a 6AR2.250 for a shorter bolt, but I just wanted to see if anyone has any information on this. Another question, do these bolts require special washers? When I used their 400 series bolts in a 466 I did not use any washers. Thanks for any information. |
Re: IH DT-407 ARP Rod Bolts
|
Registered: 12/29/2009 Posts: 13 |
I've had them custom make bolts and studs, otherwise check out extreme studs. They make a very good product and are cheaper, good guys to deal with. |
Re: IH DT-407 ARP Rod Bolts
|
No washers needed just cut them off. Works fine, that's what's in ours. WipeOut has the 407 bolts on hand also but are more expensive |
Website Statistics
Global: Topics: 38,701, Posts: 229,801, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,951.
Global: Topics: 38,701, Posts: 229,801, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,951.
Our newest member CBeard