John Deere 359 to 4010 January 30, 2017 12:00PM
How many different backing plates on the 359 will work for this application?

I know for a fact the backing plate off a late 4050 will work but what about a 4030? I've heard some people say yes and some people say no.

If anyone has one of these plates available I would defiantly be interested.

Thanks
Reply Quote

Re: John Deere 359 to 4010 January 31, 2017 01:51AM
The late 4050 engine plate part # R83132 [ NLA from John Deere ] will fit 4010. It is the only plate that John Deere shows in parts that will work. The 4030 engine plate will fit 3020, but not 4010. You could have a custom engine plate made.



Edited 1 time(s). Last edit at 01/31/2017 02:00AM by PULLMX.
Reply Quote

Re: John Deere 359 to 4010 January 31, 2017 05:24AM
R51794 is the same plate, I hate to be argumentative but if it fits a 3020 it will fit the 4010/20. I have personally put a 4010 motor in a 3020 and it did not need an adapter just longer rails and a longer hood. Looked into putting a 2640 motor but found a good buy in the 4010 motor. The adapter would work for that as well just decided to go the other way. If you really want the 300 series get the adapter and go to work.
Reply Quote

Re: John Deere 359 to 4010 February 01, 2017 01:15AM
Thanks allot guys I really appreciate the conformation. I actually ended up finding a plate yesterday finally so I should be set.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,678, Posts: 229,780, Members: 3,328.
This forum: Topics: 37,078, Posts: 225,950.

Our newest member Jason