West Central Iowa Pullers Meeting February 11, 2017 08:29AM
Any updates for the meeting last weekend? Hoping to hook with this group this summer. Not sure if we fit farm stock or 3000 rpm. Any rule changes?? Thanks in advance.
Reply Quote

Re: West Central Iowa Pullers Meeting February 11, 2017 01:17PM
Farm stock is now 10 mph limit.
Reply Quote

Re: West Central Iowa Pullers Meeting February 11, 2017 03:56PM
Any plans for a 3200 RPM cut tire class to mirror Neb bush??
Reply Quote

Re: West Central Iowa Pullers Meeting February 12, 2017 01:59AM
Sounds like it will be offered to hopefully bring them over. As I understand it the 3000 and 3200 will be kept separate with each their own rules. No mixing 3200 into the 3000. If a 3000 wants to up it 200 rpm and go to the 3200 they can. But will be going against P pumps and cut tires.
Reply Quote

Re: West Central Iowa Pullers Meeting February 12, 2017 09:48AM
10 MPH? Well there goes that class, those boys aren't gonna wanna run 10 mph
Reply Quote

Re: West Central Iowa Pullers Meeting February 12, 2017 04:25PM
Why? 10 mph. too fast?
Reply Quote

Re: West Central Iowa Pullers Meeting February 12, 2017 11:28PM
Not sure if farm stock was changed to 10 mph or it was left at 10 mph. There was a vote by those at the meeting between 12 mph and 10 mph. 10 won over whelmingly.
Reply Quote

Re: West Central Iowa Pullers Meeting February 12, 2017 11:30PM
10 mph is for the farm stock, not the 3000 or 3200.
Reply Quote

Re: West Central Iowa Pullers Meeting February 13, 2017 01:48AM
WCIP has a really good following in the farm stock class. 10 mph is the speed limit on the class. They run 3000 rpm class, 3LM466 out of the box turbo, A pump no cut tires. Also added this year is a 3200 rpm class, 466, 3LM out of box turbo, P-pump, cut 20.8 tires. This class is the same a Neb. Busch pullers as some come over the river from time to time to pull.
Reply Quote

Re: West Central Iowa Pullers Meeting February 13, 2017 12:30PM
That Bush class needs to be a gt42 charger class and make something out of it
Reply Quote

Re: West Central Iowa Pullers Meeting February 13, 2017 02:44PM
They need a profarm class and leave the 3000 class alone. More speed and cut tires will be an improvement but it just complicates everything for everyone.

466
Water
3500 rpm
Gt42
20.8 cuts
Reply Quote

Re: West Central Iowa Pullers Meeting February 14, 2017 06:57AM
You guys are more than welcome to go to the meetings and voice your opinion on the class and or any/what changes you would like to see.....
Reply Quote

Re: West Central Iowa Pullers Meeting February 14, 2017 11:17AM
Yep that would be a perfect combo. They would run strong for a limited rpm class
Reply Quote

Re: West Central Iowa Pullers Meeting February 14, 2017 12:58PM
We were offering a class similar to what was described above, GT42, 466, water, 3500 rpm with cut tires, but due to lack of interest we decided to offer the 3200 rpm class that mirrors Nebraska Bush Pullers. If interest would return we would gladly offer the 3500 rpm class again. Our rules for a 3000 rpm class will be the same as it has been for a number of years;3000 rpm, 10 mil A pump, 3lm 466 turbo, and 466 cubic inch. At our meeting we voted to change the farm stock speed from 12 to 10 mile per hour. The farm stock tractors are also limited to 2800 rpms. If anyone has any questions or concerns feel free to pm me. Thanks for your interest in our association.
Reply Quote

Re: West Central Iowa Pullers Meeting February 14, 2017 01:56PM
Sorry for the misunderstanding. Have been to a couple of the pulls where you hook with another org. Very nice group of farm stocks and 3000s.
Reply Quote

Re: West Central Iowa Pullers Meeting February 14, 2017 01:57PM
Also, does anyone have a tentative schedule for 2017 for this group or Neb bush??
Reply Quote

Re: West Central Iowa Pullers Meeting February 14, 2017 02:13PM
Hopefully by the end of this month we will have the schedule finalized and ready to post.
Reply Quote

Re: West Central Iowa Pullers Meeting February 14, 2017 02:01PM
Not a problem we are always looking for new ways to improve our association and enhance our shows. We appreciate all the input.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,763, Posts: 229,925, Members: 3,337.
This forum: Topics: 37,095, Posts: 226,021.

Our newest member DANNY.WAINSCOTT@YAHOO.COM