11:24:10am, Saturday, May 11, 2024
Cummins injectors in my Minnie mo head what tip works best
|
Registered: 01/20/2012 Posts: 70 |
I put Cummins 8.3 injectors in my d585 in my g1355 . The tips I got aren't right know fvp makes one but I already got the work done and just need injector tips that works in there Edited 1 time(s). Last edit at 01/17/2018 05:25AM by khenrichs. |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 09/15/2010 Posts: 49 |
Curious what's size tips? 5_22? Maybe interested in tips for my minnie |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 08/02/2008 Posts: 236 |
Are you using the stock 585 pistons? They take a pretty unique spray pattern, similar to a 478 Hercules. |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 01/20/2012 Posts: 70 |
I got a custom pistons need a 5 .010 tip |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 06/26/2017 Posts: 17 |
Who makes Pistons? Looking into this as well |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 01/20/2012 Posts: 70 |
Vogels did mine there Aires and the same price as Agco just can't use stock injectors |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 08/02/2008 Posts: 236 |
. Edited 1 time(s). Last edit at 01/17/2018 11:55PM by sfd823. |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 08/02/2008 Posts: 236 |
What's not right about you nozzles? What angle do the injectors sit in the head compared to the 8.3? What spray angle are your nozzles? |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 01/20/2012 Posts: 70 |
The shop I used put these tips on my 8.3 injectors and they are not spraying right I I spit a head gasket and when it was apart I pop tested a injector in the head on the bench and found that four of the seven streams we're spraying on the cylinder head only there were hitting the Piston bowl. I've learned alot the hard way lol and only need a 5 hole Edited 1 time(s). Last edit at 01/17/2018 02:52PM by khenrichs. |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 08/02/2008 Posts: 236 |
4 of the 7 streams? Are you sure they didn't use a nozzle for a 24V application? They were normally 7 hole and their spray pattern would do what you're describing. What's the Bosch number on the nozzle? |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 01/20/2012 Posts: 70 |
I'll look tonight they were not Cummins i believe . |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 01/20/2012 Posts: 70 |
My injectors sit in the head at roughly a 30 degree angle on the left side of the engine. I tried a tip out of a 1000 series Perkins but fuel still it the head on the right side of the head . Now a tip out of a 1011f deutz looked good but had to be spun 180 and no good way to hold it with the injectors 180 out |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 01/20/2012 Posts: 70 |
This is a picture of my pistons |
Re: Cummins injectors in my Minnie mo head what tip works best
|
No puller
|
We have aires positions as well with 8,3 cummins bodies have to have tips made to mach bowl of piston with the angle of the injector hole in the head we had fairvalley do ours |
Re: Cummins injectors in my Minnie mo head what tip works best
|
Registered: 01/20/2012 Posts: 70 |
My injector tip number is dlla158p615. |
Website Statistics
Global: Topics: 38,731, Posts: 229,864, Members: 3,332.
This forum: Topics: 37,086, Posts: 225,984.
Global: Topics: 38,731, Posts: 229,864, Members: 3,332.
This forum: Topics: 37,086, Posts: 225,984.
Our newest member WestonFarms