24.5 HP 2000 air pressure May 08, 2018 07:25AM
What tire pressure does anyone recommend for these HP's on a 8500 lite pro. Heard around 5 psi if that sounds normal. Any input from those running these.
Reply Quote

Re: 24.5 HP 2000 air pressure May 08, 2018 07:36AM
Lots of variable such as rim width, how new are the casings and how they are cut and profiled. 5 1/2 to 6 1/2 psi should be putting you in the ball park range though.


Taylor Van Beek
Extreme Performance & Tire Cutting
712-470-1900
extremeperformancepulling@gmail.com
Reply Quote

Re: 24.5 HP 2000 air pressure May 08, 2018 07:40AM
I have heard as low as 3-4 #
Reply Quote

Re: 24.5 HP 2000 air pressure May 08, 2018 07:42AM
25" rims & 2014 casings. I believe they were supposed to be originally cut by CM tires. Thanks for any more advice.
Reply Quote

Re: 24.5 HP 2000 air pressure May 11, 2018 02:48PM
anybody else able to tell me what air pressure they normally run on
Reply Quote

Re: 24.5 HP 2000 air pressure May 12, 2018 01:24AM
Have someone accountable watch the sidewall when under load at 100 foot mark,to see flex amount. best way,or you only guess,others pressure means nothing to you and your style of driving,- pulling
Reply Quote

Re: 24.5 HP 2000 air pressure May 15, 2018 01:57PM
Thanks for the suggestion and understand but just wanted some average psi on what most run to make sure we don't go too low or too high to start off that's all.
Reply Quote

Re: 24.5 HP 2000 air pressure July 10, 2018 12:59AM
We've tried 5 to 6 psi and noticed the holes are humped up a bit in the middle. Just looking for more input and understand every track & tractor is different. Thanks for any honest replies.
Reply Quote

Re: 24.5 HP 2000 air pressure July 10, 2018 01:44AM
Also remember not 2 air gauges are the same. Someone else's 5 psi might be 6 on your gauge.
Reply Quote

Re: 24.5 HP 2000 air pressure July 10, 2018 02:55AM
I agree. Just wanted to know what pressure is typically used for these tires or if there is truly a max psi not to go over to or under.
Reply Quote

Re: 24.5 HP 2000 air pressure July 10, 2018 11:24AM
I have a llp8500 and have found 5.75-6.25 depending on track. I have a freind who runs 5 and it works great for him but doesnt work for mine. Hope this helps
Reply Quote

Re: 24.5 HP 2000 air pressure July 10, 2018 03:11PM
Thanks. I will try on the upper side and give it a try. Just always ran psi to keep the holes level when we had the old style pullers.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,620, Posts: 229,677, Members: 3,325.
This forum: Topics: 37,065, Posts: 225,892.

Our newest member JD_8520