Update on 30.5x32 Pro Puller Tire May 30, 2018 11:25AM
Here are some pictures taken of a 3D rendering of our new 30.5X32 Pro Puller going to be built here in the USA.

There will be a 25 degree bar angle to allow easier cutting both steeper and shallower bars.
The tire will come in both a lighter and heavier ply construction for those needing a light tire, or a stronger sidewall. Lighter tire target weight is 370 lbs, heavier is 395 lbs.
The edge of the tire will be a flat corner, allowing for any notch pattern you want. It will also allow you to cut off more shoulder rubber for a more round profile.
They will feature a .200 bar depth with plenty of underlay rubber for deeper bar and sharpening.
Rubber will be at 85 points of hardness.
Tires will be post inflated at the factory to ensure consistent sizing withing legal specs.
Tires will be priced at $8,500 per pair for casings.

We are hoping to have our first tires in November, and things are running on schedule so far. Call your cutter to put in a pre-order today!

For any questions, please call me at 402-840-0244, or visit our website at www.ProPullerTires.com

Aaron Docter
Pro Puller Tires
402-875-0748
Facebook


Reply Quote

Re: Update on 30.5x32 Pro Puller Tire August 07, 2018 11:31AM
The mold for our 30.5X32 is almost done, and should be to the factory by the middle of November. Tire production should be going by early December! The two models will be a 6 ply and a 10 ply. We are hoping to keep the 6 ply around 360 lbs before any cutting, but more information will be available once the tires start getting built. We are very excited to get this tire on the track for next season!

Tires will be available direct from Pro Puller Tires, John Deere Pulling Team in Denmark, or any cutter across the US.

Contact me with any questions or preorders at 402-840-0244.

Thanks!

Aaron Docter
Pro Puller Tires
402-840-0244
Keep up to date with us on Facebook

We offer financing!
Check out our total winnings from the last two seasons.
Reply Quote

Re: Update on 30.5x32 Pro Puller Tire August 08, 2018 08:18PM
What will the weight difference between these and the old style 10 ply puller 30.5 be? I can't seem to find what the weight is on The old style tires
Reply Quote

Re: Update on 30.5x32 Pro Puller Tire August 08, 2018 11:25PM
I was just wondering the same thing Under Pressure. Anyone know what to old 10 ply 30.5 Pullers weigh?
Reply Quote

Re: Update on 30.5x32 Pro Puller Tire August 09, 2018 12:09AM
There's a ton of variables on the old style pullers, their build date, how far they are cut down, etc. We've had 10 ply old style pullers that weigh between 350 and 400 for just a tire only.


[www.ulmerracing.com]
Reply Quote

Re: Update on 30.5x32 Pro Puller Tire August 09, 2018 12:42AM
Allen is correct but we have weighed many sets and the common number is about 365
Reply Quote

Re: Update on 30.5x32 Pro Puller Tire August 31, 2018 02:57AM
We now have an expected date on our new US built 30.5x32 tires! The mold is currently on its way to the shop for final prep work and engraving.

Mark your calendars for December 1st. If you have a hard time keeping track of time, stay updated on the front page of our website. We have a handy count down timer until the first tire rolls off the line!

We are extremely excited to get this tire on the market for you guys. Contact us or any cutter of your choosing for more information or to put in an order.

Aaron Docter
Pro Puller Tires
402-840-0244
Facebook
Reply Quote

Where to see the new 30.5s this winter September 20, 2018 08:45AM
We are currently narrowing down the list of pullers that will test the tires this winter pulling season. We are looking to run them at the Cloverdale, Gordyville, Louisville, Murfreesboro, Harrisburg, and Lincoln pulls, but have not made any decisions quite yet on who will be running them, or what class they will be in. Contact me or your cutter for more information on the tires!

Aaron Docter
Pro Puller Tires
402-840-0244
Facebook
Reply Quote

Re: Where to see the new 30.5s this winter September 21, 2018 08:45AM
Shouldn't this be over in the classified/for sale section?
Reply Quote

Re: Where to see the new 30.5s this winter September 21, 2018 03:00PM
Looks like a thread discussing pulling tires to me.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,625, Posts: 229,686, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,898.

Our newest member JD_8520