Injector tube November 10, 2018 05:35PM
Does anybody have a suggestion on how to get a injector tube out when you fill a head. Thanks.
Reply Quote

Re: Injector tube November 11, 2018 02:34AM
Machine it or go to work with a dye grinder and cut it out
Reply Quote

Re: Injector tube November 11, 2018 02:52AM
If head is on tractor pack alittle rag or some toweling to the bottom. This keeps matter from falling in the cylinder.
Then use a 3/4 course tap cut acouple threads in the tube so you can start a bolt.
I have a adapter to thread my slide hammer welded to the bolt screw bolt in tube
screw slide hammer into adapter and hammer tube out.
Reply Quote

Re: Injector tube November 11, 2018 10:40AM
I did the slide hammer and split the tube top came out bottom stayed in seems like the filler is stuck to the tube . Dont know what to do now
Reply Quote

Re: Injector tube November 11, 2018 11:41AM
If it was in that good why are you taking it out?
Reply Quote

Re: Injector tube November 11, 2018 01:18PM
Do what i said what you tried works on a normal head not filled unless you greased them machine or use a die grinder
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,778, Posts: 229,950, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,034.

Our newest member Jacklovik2009