Re: 1066 ih

	1066 ih December 21, 2019 10:11AM
oliverguy1990 Registered: 02/26/2019 Posts: 49	How much power can you get from a 1066 with 5x13 injectors with a 10mm model 100 worked over Edited 1 time(s). Last edit at 12/21/2019 10:12AM by oliverguy1990. Reply Quote

	Re: 1066 ih December 21, 2019 10:23AM
Bad Medicine Registered: 12/25/2015 Posts: 66	Lots of questions here, how big of Charger, Injectors ain't big enough, and what do you mean by worked over 100? Reply Quote

	Re: 1066 ih December 21, 2019 10:47AM
oliverguy1990 Registered: 02/26/2019 Posts: 49	Turbo would be a sxe257 borgwarner and I'm I'm having pump guy doing something with the dilevery valve removing fuel plate adding shim and something with fuel controller he thought it would be somewhere around 210 to 250cc and then the 5x13 injectors Reply Quote

	Re: 1066 ih December 21, 2019 01:22PM
mx305	250 to300 Reply Quote

Re: 1066 ih December 21, 2019 02:07PM

gonzo 1066

Registered: 10/21/2008
Posts: 756

I have found over the years that 200hp is easy with a T-04 and opened stock pump. Change to a 3-LM466 good injectors and good 10mm pump with a cut delivery valve and extra internal linkage work 250 to 275 hp. Add water methanol injection for another 25-50 hp Up from that a 13mm pump with a good supply pump, injectors and bigger lines, a more aggressive turbo gets you on the way. Running a 966 4 blade fan helps free up a few horsepower

Reply Quote

	Re: 1066 ih December 22, 2019 12:04AM
oliverguy1990 Registered: 02/26/2019 Posts: 49	I cant run any water. And I eventually will put a 13mm pump and injectors I already have an s300 with an .88 divided housing but I'm pretty sure stock pump wont spin it thays why I was gonna put the sxe257 on for now Reply Quote

	Re: 1066 ih December 22, 2019 10:59AM
mx305	We have a 1086 with a 414 stock pump opened up s200 slightly bigger injectors 255 hp on pto dyno. And another thing 300 hp seems to be the limit on stock head gasket Reply Quote

	Re: 1066 ih December 22, 2019 11:36AM
oliverguy1990 Registered: 02/26/2019 Posts: 49	I'm guessing at 255 high 1st is about what you can run? Reply Quote

	Re: 1066 ih December 22, 2019 12:20PM
oliverguy1990 Registered: 02/26/2019 Posts: 49	And what size s200 do you have on your 1086 Reply Quote

	Re: 1066 ih December 23, 2019 04:21PM
mx305	yes 1st is it the s200 has a 2.4 inlet Reply Quote

	Re: 1066 ih December 22, 2019 11:41AM
Wrong	A stock head gasket will hold well over 300 horse I ran one for years and I was pushing 600 Reply Quote

	Re: 1066 ih December 24, 2019 07:25AM
oliverguy1990 Registered: 02/26/2019 Posts: 49	Do you know what size exhaust housing that s200 is mines a .83 I believe Reply Quote

Newer Topic Older Topic

Print View RSS

Author:

Your Email:

Subject:

Help information

Spam prevention:

Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.

Enter code:

Message:

Website Statistics

Global: Topics: 38,777, Posts: 229,949, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,034.

Our newest member Jacklovik2009