sbjd welded up wet clutch grinds June 24, 2020 11:36AM
We have a sbjd with a wet clutch that is welded up. If you start the tractor with the clutch pressed in everything is fine. When you let the clutch out if the pto lever is back it grinds terrible. If you push the lever ahead you cant shift gears but doesn't grind. Changed one other thing is put a new style hitch on back so we removed the pto shaft and bearing on the back. Did not take the big shaft out. I must have missed something. Any help is appreciated. Thank
Reply Quote

Re: sbjd welded up wet clutch grinds June 24, 2020 01:47PM
Did you modify clutch valve. If not pto brake is still trying to work.
Reply Quote

Re: sbjd welded up wet clutch grinds June 24, 2020 02:56PM
The clutch valve has a jumper hose on it but it sure seems like the pto brake is trying to work. My understanding is if you pull the lever all the way back it applies the brake and this is what seems to be happening. Is there more that needs to be done to the clutch valve?
Reply Quote

Re: sbjd welded up wet clutch grinds June 24, 2020 03:28PM
You cannot use a hose to jump it on the outside you have to take the clutch control valve housing off and modify it to make the traction and pto operating pistons work together with the pedal and block the pto brake port
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,721, Posts: 229,845, Members: 3,330.
This forum: Topics: 37,083, Posts: 225,972.

Our newest member LT Limited Pro