Power out of 466 with gt42 March 09, 2022 03:03PM
Curious as to what kind of power a 1066 with a 625cc fvp model 100, 466 motor, Vogel cam, 4x24 dual feed injectors, and a fvp gt4294 would make for power. Debating going that route and was curious on horsepower numbers. Thanks.

Re: Power out of 466 with gt42 March 10, 2022 02:14AM
Probably be in the 700 to 800 hp range.

Re: Power out of 466 with gt42 March 10, 2022 04:00AM
Quote
Likely
Probably be in the 700 to 800 hp range.

That would be my guess as well. A rotary pump will hold you back quite a bit over a P.



Follow us on Facebook @ Mean Streak Pulling Team
[m.facebook.com]

Re: Power out of 466 with gt42 March 10, 2022 04:14AM
Water injection or no? Cooler?

Re: Power out of 466 with gt42 March 10, 2022 02:57AM
I used to run a 466 5x22 single feeds, gt 42 on a p pump at 720 cc and was 1000. I would think you should be at least 800



Edited 1 time(s). Last edit at 03/10/2022 03:35AM by Oly.

Re: Power out of 466 with gt42 March 10, 2022 12:19PM
Water or cooler?

Re: Power out of 466 with gt42 March 12, 2022 06:39AM
Would a precision turbo make more power than the gt42 then? Heard alot of good about both. Can't seem to find much info other than word of mouth.

Re: Power out of 466 with gt42 March 12, 2022 09:27AM
You don’t have enough fuel for much more turbo

Re: Power out of 466 with gt42 March 13, 2022 01:30AM
Better off to run a 467 S400 Borg Warner with this setup. GT42 (whether it's 4294 or 4202) isn't going to lug as well with only 466 cubes and that larger compressor wheel - especially if you can't run a cooler and don't have a P pump. Not to mention you get a .90a/r turbine housing option for fine tuning to help lug down low in the RPMs, where I believe the GT42 only goes down to 1.01a/r.

There's a new 467 for sale on the "for sale" section of this page priced reasonable.

Re: Power out of 466 with gt42 March 13, 2022 08:24AM
They make all sorts of covers for a gt 42. i ran a 115 on mine and had plenty of lug

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,706, Posts: 229,808, Members: 3,330.
This forum: Topics: 37,082, Posts: 225,954.

Our newest member LT Limited Pro