10:34:26pm, Sunday, May 05, 2024
St Croix County Fair Truck and Tractor Pull
|
Registered: 04/22/2015 Posts: 63 |
Friday July 21st 2023 7pm start time
Classes Straight Off The Farm Non-Turbo Plaques for 1st, 2nd, and 3rd -4500 4mph -5500 4mph -7000 4mph -9500 5mph -10500 5mph Straight Off The Farm Turbo Plaques for 1st, 2nd, and 3rd -9500 6mph -11000 6mph -13000 8mph -15000 8mph After Chores Non-Turbo Payout for 1st $60, 2nd $45, and 3rd $30 -4500 6mph -5500 6mph -7000 6mph -9500 8mph -10500 8mph After Chores Turbo Payout for 1st $60, 2nd $45, and 3rd $30 -9500 10mph -11000 10mph -13000 10mph -15000 10mph Improved Farm - 2.8" Inlet Turbo Maximum Payout for 1st $100, 2nd $75, and 3rd $50 -10500 -11500 Pro Farm - 3x3 Turbo, Any Pump, 20.8 Tire Maximum Payout for 1st $150, 2nd $100, and 3rd $75 -9500 -10500 Open Tractor Payout for 1st $300, 2nd $225, 3rd $150 -6500 -7500 -9500 Truck Classes -6200 Street Gas – Payout for 1st $50, 2nd $40, and 3rd $30 -6200 Open Gas – Payout for 1st $75, 2nd $50, and 3rd $35 -8500 Street – Payout for 1st $100, 2nd $75, and 3rd $50 -8000 Open – Payout for 1st $150, 2nd $100, and 3rd $75 $25 a hook for straight off the farm $30 a hook for all other classes 2 hooks per tractor 200# Grace on scale No duals allowed Wild rose sleds Rules posted at [stcroixcofair.com] Any Questions please reply to this post, or Contact Dillan at 715-641-0612 Edited 1 time(s). Last edit at 07/18/2023 03:48AM by Blackstack 460. |
Re: St Croix County Fair Truck and Tractor Pull
|
Turbo Puller
|
What are the rules in the straight off the farm 9500 and 11000 versus the after chores 9500 and 11000? |
Re: St Croix County Fair Truck and Tractor Pull
|
So technically 1066s and 4430s can run press steel rims in farm stock because it’s an option from the factory and in the parts books…. |
Re: St Croix County Fair Truck and Tractor Pull
|
Registered: 04/22/2015 Posts: 63 |
It is in the 1066 parts book as "wheels and traction, outer, dual rear wheels, disc type. Given that wording it would not be allowed because they were duals not the inner drive tires. The factory option is more directed towards something along the lines of a 666 IH, MH 44, JD A, something that came on press steel as its inner tires from the factory. It is in the parts book and legal for a 4430. |
Re: St Croix County Fair Truck and Tractor Pull
|
Rick James
|
To be honest it shouldn't matter if you have pressed steel rims or not, you could technically farm with them on and there are guys that do. If someone wants to take the time/effort to put them on let them run. Seen a 1086 there last year that you wouldn't let run as "stock" because it had them on. |
Re: St Croix County Fair Truck and Tractor Pull
|
Puller
|
Do you just not want them to enforce any of their rules? There is a class for them to pull in if they don't meet the pure farm rules, it's not like they can't pull. That class isn't for tractors that pull every weekend, it is for the kid that wants to bring his tractor to the county fair and have some fun. |
Re: St Croix County Fair Truck and Tractor Pull
|
Rick James
|
Was just saying that it shouldn't matter what the rim was. It's probably good to question the rules every now and then otherwise it'll get out of hand like our country.... |
Re: St Croix County Fair Truck and Tractor Pull
|
Registered: 04/22/2015 Posts: 63 |
Here are the rules for both classes, i just copied and pasted from the above link. your main differences would be rpm, speed, and turbo limits.
(1) Straight off the farm (a) All general rules apply (b) Factory RPM’s per the Nebraska tractor test manual for the make and model tractor being pulled may be checked at random (c) Stock drawbar, no welded on d rings, clevis must pin or bolt to the drawbar (d) Minimum of 20” from the centerline of rear axle to the point of hook on the clevis (e) Must be equipped with working PTO and Hydraulics (tractors manufactured prior to 1958 do not need hydraulics) (f) 16.9x38 tire size maximum in 4500 and 5500 (g) 18.4x38 tire size maximum in 7000 and heavier non turbo (h) 20.8x42 maximum in all turbo classes (i) No press steel rear wheels unless available as an option on the make and model of tractor being pulled (Example: MH 44 or JD A/ (j) Factory air cleaner, piping, and turbo piping (k) Factory carburetor, injection pump, and turbo for make and model of tractor being pulled (l) No aftermarket pusher pumps of any kind (m) Maximum drawbar height of 20 inches (2) After Chores (a) All general rules apply (b) Factory block, transmission, and rear end for that make and model tractor (c) Cast cylinder head or replacement head must appear factory (d) No Minneapolis Moline HD800 engine components (e) Any cast iron manifolds are allowed (f) Rear fenders required (g) Side shields allowed (h) No rpm limit (i) Hitches can be 20” in height and no closer than 18” from the hook point to the centerline of the rear axle (j) Updraft carburetors only, 2 cylinder John Deeres can have duplex carburetor (k) Any cut on tires allowed (l) No water injection (m) 2.4” turbo inducer size limit (n) Must retain factory type injection pum |
Re: St Croix County Fair Truck and Tractor Pull
|
In Glenwood
|
In Glenwood right now. Rain is done, pull is still on. |
Website Statistics
Global: Topics: 38,703, Posts: 229,804, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,952.
Global: Topics: 38,703, Posts: 229,804, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,952.
Our newest member CBeard