IH External Oil Pick Up For Stock Pump January 24, 2010 05:50AM
What do you do to make a external oil pickup when useing the stock oil pump. Do the make a plate to block off the back side of the front cover where the stock pick up bolts to? Can you just drill and tap the front cover to put a fitting out the front for a hose? Do guys make a block to go out the front to put a bigger fitting on? What size hose or AN fitting size would you need for a SF. Don't want to starve the pump or motor for oil.

Re: IH External Oil Pick Up For Stock Pump January 24, 2010 08:11AM
go with a external pump and save some headaches.i use a hydraulic pump from bailey co.pn 252-178 .cheap but reliable

Re: IH External Oil Pick Up For Stock Pump January 24, 2010 10:16AM
what size cogg pullys do you use?

Re: IH External Oil Pick Up For Stock Pump January 25, 2010 02:09AM
i turn mine about 60% crank speed.gives me about 90psi

Re: IH External Oil Pick Up For Stock Pump January 24, 2010 11:03AM
Kenny,

give me a number to call you or email address to contact you and I should have most of everything you will need.

Re: IH External Oil Pick Up For Stock Pump January 25, 2010 01:18AM
wipeout has what you need

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,640, Posts: 229,706, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.

Our newest member JD_8520