building case hot farm February 06, 2010 01:16AM
what is the best rearend to go with, 1070, 1030, 970, 870 Ive heard of all being used? who needles them?
can have 504 cubes, so use a 504 or poke and stroke a 451?
drill out heads for deere injectors or use pencil injectors?
would like to make 1000 horse. using p-pump 3x3, possibly intercooler also
are there different manifolds out there that work better, example the rear feed dozers for an IH ect. ect.?
have heard of case roller rockers, lifters and cams, where from?
thanks for hellp
Reply Quote

Re: building case hot farm February 06, 2010 05:07AM
The only major difference between the 30 and 70 series is the where the shifter are. They all have the same gears in. If you use a 7 or 870 you would have to change bell housing and input shaft. Just get a 504 and be done with it. Any of them from a 90 or 94 series and the 1570 have the big thread in bosch injectors. The stock manifolds should work fine for you. Riverside I know does rollor stuff. My rollor rockers came from Indy cylinder head (i think) they had them on the shelf.
Reply Quote

Re: building case hot farm February 07, 2010 03:07AM
I have roller rockers,needle differentials and steel cam blanks on hand,715-308-2163
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,687, Posts: 229,792, Members: 3,328.
This forum: Topics: 37,080, Posts: 225,955.

Our newest member Jason