02:01:43pm, Saturday, May 11, 2024
656 ih 466 motor
|
future puller
|
i am putting a 466 in a 656 frame i am looking for ideas on a clutch and flywheel set up. any ideas? |
Re: 656 ih 466 motor
|
Registered: 08/29/2008 Posts: 211 |
better go with T/A delete doubt you find on of those little TA's that will take any kind of power |
Re: 656 ih 466 motor
|
Lucifer
|
Talk to Darren at Rursch Specialties. I'll second the TA delete. |
Re: 656 ih 466 motor
|
FOOLISH PLEASURE II
|
I have a 466 bolck in front of a 656 housing. I have a 4 disk growler but do not have room for a ring gear, I put a airplane starter in the front the the engine, and it works very well, starter is 36 volts, so does not run but only a second or two to start the motor. Works great! |
Re: 656 ih 466 motor
|
Anonymous User
|
how do you engage that? is that some sort of a love joy connecter? |
Re: 656 ih 466 motor
|
Registered: 11/04/2008 Posts: 270 |
call me we have the back plate, clutches and ta eliminators with fast set of constant mesh gear sets and you can put your starter right back in the stock hole. we are currently working on the last phase of the eliminator kits.
floyd isbell 570 265 3932 cell 570 637 1311 |
Re: 656 ih 466 motor
|
Red guy
|
Floyd,
Do you have a kit to put a red diamond in an M? I never liked 560's. If so is the plate you use a home made plate? or an IH plate? If it is an IH plate do you have to alter the plate? Thanks |
Re: 656 ih 466 motor
|
Registered: 11/04/2008 Posts: 270 |
YES WE HAVE A PLATE TO PUT A RD ENGINE IN M. THEY ARE LASER CUT LOOK LIKE ORIGINAL. PICTURE OF THEM UNDER PARTS AT customtractorparts.com we also have the clutches you would need. |
Re: 656 ih 466 motor
|
FOOLISH PLEASURE II
|
Sorry it took so long to get back to you!
There is a 3 tooth set up of both the end of the crank and on the end of the starter, when the engine is running it will push the starter set of teeth back into the starter thus shutting off the airplane starter. Really works well, and is very abuseville. The down fall is that you need 3 twelve volts batteries (36 volts) to make the starter work 100%. We use forklift batteries, dry cell, and are farly small! |
Re: 656 ih 466 motor
|
Registered: 06/03/2008 Posts: 44 |
I use one with two twelve volt batteries and it still spins up nicely. |
Re: 656 ih 466 motor
|
Anonymous User
|
Thank you for the info, wanting to do the same to my tractor! |
Re: 656 ih 466 motor
|
Registered: 08/14/2013 Posts: 203 |
Do you every have issue with hard engagement of the starter I am thinking wiring a second circuit to my 36 volt start using 12 volts to soften the engagement.. With full 36 volts is slams in hard. Thanks. |
Website Statistics
Global: Topics: 38,731, Posts: 229,864, Members: 3,332.
This forum: Topics: 37,086, Posts: 225,984.
Global: Topics: 38,731, Posts: 229,864, Members: 3,332.
This forum: Topics: 37,086, Posts: 225,984.
Our newest member WestonFarms