Dt360 and Dt466 Compatability September 14, 2010 12:23PM
I am in the middle of putting a DT360 in my Excursion. I was wondering about the injector bodies. I see many 466 injectors for sale on here and was wondering if they will fit in the 360 cup.
Also, are the front covers the same....

Thanks,
Jim

Re: Dt360 and Dt466 Compatability September 14, 2010 02:29PM
Injectors are interchangable. So aren't the front and rear covers.

Re: Dt360 and Dt466 Compatability September 15, 2010 10:17AM
Are or aren't. Sorry for the confusion.....

Re: Dt360 and Dt466 Compatability September 15, 2010 01:35PM
Sorry, I did make that confusing. Injectors, front cover, and rear cover will fit the 466 and 360.

Re: Dt360 and Dt466 Compatability September 16, 2010 08:36AM
what is the difference in the D360 ag and the DT360 truck?

Re: Dt360 and Dt466 Compatability September 16, 2010 11:07AM
The truck has a 4 inch bore 4.5 stroke the ag has a 3 7/8 bore with a 5.003 stroke alse the the truck block is 1/2 inch shorter deck height

Re: Dt360 and Dt466 Compatability September 17, 2010 06:52AM
Thank you guy's!!!!! Time to buy some injectors!

Re: Dt360 and Dt466 Compatability September 17, 2010 01:48PM
just curious why do you want to know?640's run pretty good with the right stuff.they generly keep up with anything.

Re: Dt360 and Dt466 Compatability September 17, 2010 01:52PM
i am sory i responded to the wrong post.this is very cool what you are doing.hope it turns out well for you.

Re: Dt360 and Dt466 Compatability September 18, 2010 03:37PM
so which is best for puller, long stroke small bore or big bore small stroke?

Re: Dt360 and Dt466 Compatability September 18, 2010 06:09PM
long stroke for limited rpm, shorter stroke-bigger bore-for bigger valves for unlimited rpm engines.

Re: Dt360 and Dt466 Compatability October 23, 2012 05:27PM
Your numbers are not adding up

Re: Dt360 and Dt466 Compatability October 23, 2012 07:47AM
Is the spray pattern diffrent between the dt360 and 466?

Re: Dt360 and Dt466 Compatability October 23, 2012 10:00AM
what is a truck with ag crank 4 x5.003 for cubes



Edited 1 time(s). Last edit at 10/23/2012 10:12AM by Mark.

Re: Dt360 and Dt466 Compatability October 23, 2012 12:12PM
bore X bore X stroke x .7854 X number of cyl =

Re: Dt360 and Dt466 Compatability October 23, 2012 12:15PM
4 X 4.5 is only 339 cubes...............4 X 5.003 is 377 cubes

Re: Dt360 and Dt466 Compatability December 16, 2016 04:53AM
Truck 360 - 4 x 4.75
Ag 360 - 3.875 x 5.085

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.

Our newest member Jacklovik2009