How to have REAL fun with 370 cui July 18, 2011 03:53AM


7900 lbs Hot Farm
<370 cui = 3200 rpm
<427 cui = 2700 rpm


Floating Finish - the German Tractor Pulling Web Show and EU Live Streams: [www.youtube.com]
Reply Quote

Re: How to have REAL fun with 370 cui July 18, 2011 04:08AM
I assume some of those IH's would be running the 358 german, correct? What pump are they allowed, and what pump can be put on them. I have heard people ask before about putting an inline on a German, but nobody state-side seems to know....
Reply Quote

Re: How to have REAL fun with 370 cui July 18, 2011 04:44AM
They are running 13 to 16mm inline pumps in that class.
The 358 german diesel is usually equipped with a 13 or 14mm A-pump, as it takes quite a bit of work to get a P mounted on them with the original drive. The 310 block will take it just fine...
The second tractor in the video, the 1246 which ends up oob is a bone stock 358 with a HX 55, 27 exhaust housing, 13mm A Pump at 22° and 600 ccm, 3200 rpm and air to air intercooler. 2000 F exhaust temperature, 100F intake temperature out of the intercooler. 3 disk 11 inch clutch.
Stock head gasket!

70 runs without touching it. It usually runs a class lower (hence the roll bar instead of the cage and no fire suit).


Floating Finish - the German Tractor Pulling Web Show and EU Live Streams: [www.youtube.com]



Edited 1 time(s). Last edit at 07/18/2011 04:46AM by Sascha.
Reply Quote

the complete event - part 1 July 18, 2011 05:40AM



Floating Finish - the German Tractor Pulling Web Show and EU Live Streams: [www.youtube.com]
Reply Quote

Re: the complete event - part 1 July 18, 2011 02:22PM
sascha,did the volvo end up winning the class,and just curious on what kind of motor it uses and what design is the head.
Reply Quote

Re: the complete event - part 2 - 9900 lbs Farm & Hot Farm and some demo runs July 18, 2011 06:46PM



Floating Finish - the German Tractor Pulling Web Show and EU Live Streams: [www.youtube.com]



Edited 2 time(s). Last edit at 07/18/2011 06:59PM by Sascha.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,697, Posts: 229,795, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,949.

Our newest member CBeard