05:04:23am, Thursday, May 02, 2024
Tighter turbine housing for a 3LM
|
Color Man
|
Is there an affordable turbine housing for a 3LM that is tighter than the .241 or is there a housing from another model turbo that can be machined to accept the 3LM wheel and fit the 3LM bearing housing? Application - orange 301 C.I., Roosa Master pump, 3000 RPM.
Thanks |
Re: Tighter turbine housing for a 3LM
|
Registered: 04/06/2008 Posts: 309 |
you can machine a 231 or a 193 to tighten it up ..
the 193 on a 365 perkins with roosamaster at 3000rpms works pretty good to .. |
Re: Tighter turbine housing for a 3LM
|
Color Man
|
Where does the 231 or 193 housing come from? |
Re: Tighter turbine housing for a 3LM
|
Registered: 12/13/2008 Posts: 91 |
Why not try running like a H1 or an HX35 holset on it. Lots of housing options and cheap. Can prob find a used one off a dodge pick up for 200 bucks. Seam to work real good on a set up like your talking about. |
Re: Tighter turbine housing for a 3LM
|
Color Man
|
Might have to go that way. Allready have the 3LM, so I was just trying to make do with what we allready have. Thanks for the info. |
Re: Tighter turbine housing for a 3LM
|
boost
|
For a Farmstock 3000rpm class. What type of boost pressures should someone be trying to achieve? on the intake side, and the exhaust side? thanks in advance |
Re: Tighter turbine housing for a 3LM
|
binder boys
|
I have a housing that st joes blocks the one side off on a angle and dril a small hole in it for that side of the wheel worked great on my 360 cube motor i no longer use it and would be willing to sell it if your intrested. |
Website Statistics
Global: Topics: 38,671, Posts: 229,766, Members: 3,327.
This forum: Topics: 37,076, Posts: 225,941.
Global: Topics: 38,671, Posts: 229,766, Members: 3,327.
This forum: Topics: 37,076, Posts: 225,941.
Our newest member Jason