Page 1 of 2
Pages: 12
Results 1 - 30 of 56
Are there any bolts available harder than grade 8 for ih 400 series main caps? Where can you get th and what is the part number and cost ?
by
farmboy1989
-
Forum
If this is the truck you are looking for it is called the general lee and the owner lives around casey illinois I believe. It is a dodge with a 6-71. The pull of this truck is a crowd pleaser and just for fun .
by
farmboy1989
-
Forum
What does it take to get an ih 966 to 9000 lbs? 8000 lbs. farm stock tractor
by
farmboy1989
-
Forum
The Ramsey,Il Lions Club Tractor Pull that is usually held the 2nd saturday in June for this year has been cancelled . Thank you to all who have attended in the past.
by
farmboy1989
-
Forum
Running 8 mph and 12 mph classes in Ramsey Illinois, Butler Illinois, and Shumway Illinois. Have large digital display for distance and speed. If anyone is interested pm me for more info.
by
farmboy1989
-
Forum
Ramsey Illinois. 2nd saturday in June. 12,500 and 14,000 both 8 and 12mph classes. PM me for info.
by
farmboy1989
-
Forum
?????
by
farmboy1989
-
Forum
Have read somewhere a while back that someone was offering something to adjust the mcv pressure for the t/a rather than using shims for the spool. How are they doing this / what are they using?
by
farmboy1989
-
Forum
Ramsey Lions Club Tractor Pull Saturday June 9th, at Lions Park in Ramsey Illinois. Beginning at 9 AM having antiques, farm stock tractors, and semi trucks. For more information you can send an email to farmboy_89_08@hotmail.com Thanks hope to see you there.
by
farmboy1989
-
Forum
Bump, Less than a month away!
by
farmboy1989
-
Forum
Ramsey Lions Club Tractor Pull Saturday June 9th, at Lions Park in Ramsey Illinois. Beginning at 9 AM having antiques, farm stock tractors, and semi trucks. For more information you can send an email to farmboy_89_08@hotmail.com
by
farmboy1989
-
Forum
Switched to 5x20 dual feed. Have had problems with the pump, the head and plungers are not what they should have been. Tractor is running better, we are just too fast. Road gear is 26-27 mph. Gonna drop to 3rd and give it a try and then maybe do 1 and 2 under road gear this winter.
by
farmboy1989
-
Forum
Have a set for sale, send me a private message with your phone number.
by
farmboy1989
-
Forum
Was this in the open speed farm stock class? Who was the winner and with what tractor?
by
farmboy1989
-
Forum
Have the sled weight up to start really hard. If you run factory rpms, you'll be hard pressed to find a 6030 that has an easy time getting off line in road gear if the sled starts hard enough. They'll either choke or slip the clutch 150 feet(seen it done). Been to many events where I watched 6030 after 6030 go home with no distance because they made 2 attempts in road gear and couldnt g
by
farmboy1989
-
Forum
Have a model 100 pump on a 66 series set up to run road gear at the 470 cc range. Pump will be set up so we can safely run it at 130 psi with no governor problems. My question is, how many gpm pump will we need? Will most likely eliminate the gears in the back of the transfer pump and just run a mechanical or electric pusher pump. Should line sizes be changed on the fuel system or anything else
by
farmboy1989
-
Forum
241 exhaust housing is one of the tighter or is the thights exhaust housing you can get on a 3lm.
by
farmboy1989
-
Forum
When did the 466 engines change from standard to metric? Will metric bolt in a tractor? Would a 95-97 mechanical, be standard, roller cam, and P-Pump correct?
by
farmboy1989
-
Forum
Located in Illinois, Joeys466. Give us a call at 618-428-5571 for the details on the pump and price. Have receipts for everything done.
by
farmboy1989
-
Forum
We have a Scheid 13mm for sale if you are looking for one. Reply back or message if interested.
by
farmboy1989
-
Forum
I'm not sure, but I believe with out the modification work done to it, too high of supply pressure would cause a runaway condition, at least thats what a pump shop told me.
by
farmboy1989
-
Forum
An additional question to the pressure, does it have modifications to the goveror and sleeve to handle higher pressure or not? What GPM pump would a model 100 require?
by
farmboy1989
-
Forum
Anyone know why the modified antique tractor with a v6 or v8, Minnie Mo I think?, got dq'ed? Saturday noon session one of the last classes. They hooked him up to the sled and then unhooked him and all i could see when he drove off was a bunch of yelling and arms waving. Was wondering why he got hooked up if there was a problem.
by
farmboy1989
-
Forum
How much hp will a stock transmission hold without grenading? It has the bearing support and soon to have an Allied 5 disk big shaft torque. Also how much hp with good tight u-bolt clamp lock cast centers hold ?
by
farmboy1989
-
Forum
Do you have to change the pto shaft, or can it be turned out on the inside or what is the common practice for conversion? I knew that you could change drive disk centers but can you change the center on a pressure plate? What else would have to be changed besides the T/A?
by
farmboy1989
-
Forum
Replacing the T/A in our 66 series and it is a small shaft. What are the billet small shafts good for hp wise in a T/A? We are looking at least at 500 hp. What about the shaft that goes through the drive discs on the clutch, is there a source for billet small shafts on them? What are the stock ones good for and what are billet ones good for?
by
farmboy1989
-
Forum
You could probably call McCormick Diesel in Stewardson Illinois and ask Ferd.
by
farmboy1989
-
Forum
As far as the couplers, I assume I'll have to take the top cover off the tranny to get them??
by
farmboy1989
-
Forum
I am removing pto on a 66 series for pulling. Besides the box at the back and the long shaft, is there anything else i need to do or anything that I would have to worry about falling down into the transmission or things that would need blocked off because of oil?
by
farmboy1989
-
Forum
Ok, might be interested.
by
farmboy1989
-
Forum
Page 1 of 2
Pages: 12