ECITP runs the pickup on dampener and RPM box on sled, works great. Set your RPM before you hook with stop screw on pump.
by
yanmar55
-
Forum
Only if has been updated.
by
yanmar55
-
Forum
Atlas Tractor, Blaine, Mn 763-780-9548
by
yanmar55
-
Forum
ECITP 3x3 open RPM
by
yanmar55
-
Forum
Threads are bad on bolt or pump housing.
by
yanmar55
-
Forum
Newer housing have hydraulic PTO easy to remove. We used one 2 years ago. Fits like its man for it.
by
yanmar55
-
Forum
I'm not sure. Karl at Atlas Tractor can make you a clutch, but I don't know if he has ever made one with PTO. Call him 763-780-9548. Don't call on Monday and don't call before 10 AM, has kids duties. If he doesn't answer the first time, just keep trying, very busy man.
by
yanmar55
-
Forum
If you put a stock JD clutch in,it won't hold that kind of HP. 4320's were great tractors, there clutches were there weak spot.
by
yanmar55
-
Forum
Look on google
by
yanmar55
-
Forum
GOOD LUCK , smokenjoe, Wish I had more answers for you, but I done. We even have a custom 5 disk 6 finger wet clutch built, it didn't work either. Was guarantied to work. So took it back and exchanged it for new dry clutch.
by
yanmar55
-
Forum
I don't know what size tractor you have but we had 4430. Got clutch housing from 4020 or 4320, will bolt up to your transmission. Then use dry clutch. Also use clutch linkage that is in dry clutch housing. What tractor are you working with and HP, What class do you want to pull?
by
yanmar55
-
Forum
No more rain. Track should be fine on Saturday. ECIPA pullers and any one else, more than welcome.
by
yanmar55
-
Forum
As I have posted on here before about this problem. We have been where you are at. You won't want to hear this, but it works and works very well. Spend the money and go with DRY clutch. We were fighting it for 2 years. Now there are no issues. Work perfect.
by
yanmar55
-
Forum
3000 Hot Farm and Open Hot Stock MUST have ALL safety equipment. Pay back will depend on number of tractors in classes.
3000 Hot Farm 1st-$100, 2nd-$75, 3rd-$50
Open, same as Hot Farm
Both together, same
If not enough tractor for a class, would need 4 per class, will put every one in one class and will run them 2 times. If that happens, money will 150, 100, 75, and 50
9500 lbs. for all class
by
yanmar55
-
Forum
You won't need a TA. May need different gear teeth numbers.
by
yanmar55
-
Forum
You are entitled to your opinion. We have the same shift pattern as G Man with factory linkage. 3 speed tran don't have a PARK. If my foot was to slip off the clutch pedal ,with the gears we have, I would need to be turning some very high RPM's.
by
yanmar55
-
Forum
Put a push button switch under the clutch pedal. Passes Outlaw and any other organization that we have pulled with.
by
yanmar55
-
Forum
Disregard, I know the answer.
by
yanmar55
-
Forum
No open RPM classes this year?
by
yanmar55
-
Forum
Atlas Tractor, Blaine,Mn look in directory
by
yanmar55
-
Forum
Tractor salvage yards should have dozens of them.
by
yanmar55
-
Forum
Went though this, fingers on clutch may not be adjusted properly. Adjustment is quite critical. We went though this for 3 years. Finally went to dry clutch, problem was over. Just what you didn't want to hear.
by
yanmar55
-
Forum
I have 7.6 head off a 55 series. Cleaned, checked and ready to bolt. $1700 641-425-2917 email deanb@wctatel.net If you want one.
by
yanmar55
-
Forum
Go to FAQ at the top of the page, it will tell you how to do it.
by
yanmar55
-
Forum
They make a oil cooler eliminate plate that bolt to the block that lets the oil go from hole to the other. Big cooler hole is covered. No need to change anything in crack case.
by
yanmar55
-
Forum
Not every one facebooks.
by
yanmar55
-
Forum
Any word on test and tune at Plainfield, Iowa yet? Or is there even going to be one?
by
yanmar55
-
Forum