Page 3 of 4
Pages: 1234
Results 61 - 90 of 110
Has to be a 3lm intake cover so its smooth
by
Bonestock
-
Forum
531 cui 3x2.75 3lm turbo mostly in eastern ohio western pa. 18.4x38 tires 7700lbs. Great class 30+ hooks combined with ntpa, full pull productions,& copta. Better bring your A game not a cheap class
by
Bonestock
-
Forum
You could put 4.3" pistons in a 404 or a 466 block and be 413.87 cui. And still put a 7.6L head on it. That way you can still use the readily available parts. You will want to use billet pistons and steel sleeves anyway.
by
Bonestock
-
Forum
I guess you could try it but if when the pan drops the pressure's get as close as they are in my opinion that's pretty good numbers.
by
Bonestock
-
Forum
Yes it would be to big. I'm guessing you have boost gauges and not a data logger. I was in your same shoes till I put a corsa on. your highest exhaust pressure is before you let the clutch all the way out and your high intake pressure is when the box tops out. So if you put a 128 on you will lose your drive pressure when the box tops out and get under the charger.
by
Bonestock
-
Forum
To say there wasn't voter fraud is very naive. it was way to obvious. But I don't think anything will overturn the results. None of our votes counted the government wants Biden because hes a puppet. Some will argue that I'm sure but I call it as I see it. Just hope there's enough other elected professionals that still have a brain can over rule the stupid s$%#.
by
Bonestock
-
Off-Topic Forum
Usually Richard pruitt does our shows but I'm pretty sure he was at speedway 42 in west Salem Saturday. So unless someone else videoed it unfortunately no there is no videos. This is another issue I need to resolve going forward with this fairly new adventure as we are only through our 3rd year at The Mercer County Fairgrounds in celina ohio. Thanks for your interest and hope everyone ca
by
Bonestock
-
Forum
Just updating the post as a reminder to everyone that Saturday night is where it's at in celina ohio for a great show at the mercer county fairgrounds 6pm start. grandstand seating and entrance on the grounds will be free $15 for pit side seating. There will be food vendors and beer sales so come on out and let's have some fun.
by
Bonestock
-
Forum
If you're going to try and run those RPMs I would start with the 128 my guess is you won't need anything less than a 115
by
Bonestock
-
Forum
Anybody have any questions just hoping to get a great turnout of pullers and fans
by
Bonestock
-
Forum
We will be having our fair pull but at a rescheduled date will be Sept 26th at 6pm. Grandstand seating and entrance on to the grounds will be FREE thanks to some generous sponsors. Will be $15 to go in the pit area. Classes will be all dctpa rules. V8 hot rod tractors, naturally aspirated superstock tractors, altered 4x4 gas trucks, 2.5 & 2.6 combo diesel trucks, 9500lb hot farm tractors, 9000
by
Bonestock
-
Forum
The S400 is way more affordable in stock form but in my opinion the holder is a better performing turbo in stock form. But if you're pulling in a true hotfarm type class dont try any turbo in a stock form it will fly apart and make a mess fast. Good luck
by
Bonestock
-
Forum
Call Dick at Zurcher Tire in Monroe Indiana if anyone can help with that he can 18005896172
by
Bonestock
-
Forum
What are everyone's ideas on having a pull in a wheat field in say west central ohio. if there's enough interest we could have 2 tracks. We would welcome any type any class truck or tractor. Problem is we wouldn't actually be able to have any certain purse. What was thinking if we could come up with some type of betting on distance for a mixed class of everything at 1 sled setti
by
Bonestock
-
Forum
You could put a 4.562 bore in a 414 and make 466 if you want
by
Bonestock
-
Forum
A 414 crank is 4.75
by
Bonestock
-
Forum
You will have to use your frame rails. Your easiest swap would be to use an early 6466 like out of a 66 or 7720 combine because you will still be able to use your mechanical tach. the balancer will work and you will be able to use your water pump so the fan will still work in your shroud and the hydraulic pump drive will fit. If you use a 7.6 it has a gear drive water pump and wont allow enough
by
Bonestock
-
Forum
Not sure where Chris is but don't think he is working on turbos at all
by
Bonestock
-
Forum
Dan is still there in the pump shop but several of the other guys have been laid off or furloughed. Chris hasn't worked there for a few years already
by
Bonestock
-
Forum
Identical clutch to drawbar
by
Bonestock
-
Forum
You cannot use a hose to jump it on the outside you have to take the clutch control valve housing off and modify it to make the traction and pto operating pistons work together with the pedal and block the pto brake port
by
Bonestock
-
Forum
Call Dick at Zurcher Tires in Monroe Indiana 18005896171 he will fix you up. they are an Unverferth dealer
by
Bonestock
-
Forum
Singers and Bingham are in the $1500 range on the west side of ohio. but maybe a little more to go to the east side look them up and ask. Singer sled rental ( joe singer) or mark Bingham (on the mark sled rental)
by
Bonestock
-
Forum
Rick will you be having the pull in bunkerhill still on June 12&13th
by
Bonestock
-
Forum
As for my opinion on ntpa and ppl we have more ntpa events close to us and the competition is all good, but seems like ppl has a few more big money players in all classes. Either way I will go to either organization if I have time.
by
Bonestock
-
Forum
Ft Recovery is to early we are normally still finishing (or last year just getting started planting corn and beans) and catching up on our other things we leave behind while planting and not many in this county will quit to go to watch a tractor pull and or pull until all the work is done. That being said we still love having Ft Recovery 2 times a year again.
As
by
Bonestock
-
Forum
5.06 which is what an 8.1L crank stroke is and a 4 5/8" piston makes 510
by
Bonestock
-
Forum
45/8" pistons makes 504 with the crankshaft you have
by
Bonestock
-
Forum
2 years ago it was ran by the central ohio tractor pullers and last year it was taken over by the darke county tractor pullers was a way better show. so come on out and give it another chance. it is being sponsored by angry farmer penatrateing oil and others thanks and hope to see a nice crowd. PS bring your coolers full of beer it's ok to bring them in
by
Bonestock
-
Forum
One thing that is going on is the parts cost is out of this world so not everyone that wants to pull can afford it most have $60000 to $20000 they can afford which is why the local "small guys" can play most can't afford to buy 4 $8000+ turbos plus another $100000+ for the engine and all other accessories to run with the "big boys" to run super stock or at least $80000 ×4 per engine to run m
by
Bonestock
-
Forum
Page 3 of 4
Pages: 1234