Page 3 of 3
Pages: 123
Results 61 - 69 of 69
It depends how close the water jackets get to the injector bore on the 401 heads, I don't have any experience in that area.
by
DK Case
-
Forum
The valves in a 504 head won't clear the cylinders in a 401. If you're altering them to get clearance, the 504 heads with Bosch screw in injectors, not the pencil injectors are the way to go. The 2090/2290 heads have 45* angle seats which are better than 2390 on up heads that have 30* seats is what's been mentioned in other posts.
by
DK Case
-
Forum
If you're looking for used, factory parts, BAAH Farm Repair in Nisland, SD has parts at really reasonable prices. He only sells parts for Case.
by
DK Case
-
Forum
I've heard of using 60's Ford pickup drum brake spindles and buy the axle pivot from Speedway to weld into your axle tube.
by
DK Case
-
Forum
451's have the smaller journal crankshaft like the 2090 504 has. Large journal 504's were in 2290, 2390, 2590. I don't think the 2290 has the oil spray to the bottom of the piston like the 23 and larger tractors. There's a few different variations of the 504, large journal, small journal, oil spray and depending on what series, pencil injectors or large body injectors. If
by
DK Case
-
Forum
What's the calculation to get 6.33 gpm from 202 oz?
by
DK Case
-
Forum
I'll be running a Bosch A 550 cc pump.
by
DK Case
-
Forum
What's the best economical & reliable setup for a diesel pusher pump (12v) and filter setup for a hot farm/stock tractor? Do I need to get a 50 psi pump or will a 10 psi pump with the same flow work just as well?
by
DK Case
-
Forum
I can't attach pictures because they're too big. I can text them or email them to you.
by
DK Case
-
Forum
Page 3 of 3
Pages: 123