Re: Rocker Arms for Oliver Head - 14 years ago
rich,its been a long time since i ran my oliver,but im thinking the rockers i used were from a 10-20 series gas.they had the same shaft dia of .750,and were a direct slide on . going from memory the ratio was around 1.65.i dont know if the diesels are the same shaft dia.i would think someone on here could answer that easily,and would know of different ratios.maybe starting a thread about small blby patches - Forum
Re: 501 vs 466 vs 550 - 14 years ago
if its got to be n/a,tho im not a mm guy,a hd 800 sounds like a good place to start.im assuming gas is legal since you mentioned the rd-501.by patches - Forum
Re: Rose (Tractor Rollover at Tomah early 90's) - 14 years ago
we were told at tech school that,on the drawbar asembly,the peice of material the brawbar pivots in that is fastened to the rear end,kind of like a saddel or cradel.became seperated from the rearend,the bolts broke,..the opening in the side supports on the height adjustment in the rear of the hitch was smaller than this saddel,which was still attached to the drawbar,the saddel become lodged in thby patches - Forum
Re: 501 vs 466 vs 550 - 14 years ago
on you tube there is some vids of na tractors,looks like 10,000 or heavier.i think they are from ind or ill.there are some v8 mfs,ol,and ih.there is a few links from there to some of thier other pulls.by patches - Forum
Re: Engines vs Motors - 14 years ago
i have used both terms my times ,even in the same sentence.i got out my old mit manuals on theory and design of the internal combustion engine,and i cannot find the word motor in any of them.i was expecting to though??by patches - Forum
Re: Longtime GN Pullers - 14 years ago
3 bears,seems like they have been running that truck foreverby patches - Forum
Re: Longtime GN Pullers - 14 years ago
lehn,and van dorpe have been active since early 80's.van dorpe pulled a lt super back then.vories had a slight break in time between the ps-ss days and the mod dident he.linders have been around for a long time also.by patches - Forum
Re: Oliver Gears - 14 years ago
urmson used to have them for the 88 rears,try him.goes by dynomitrix,but not sure on spelling.probably a builders link on here,if not its been in the back of the puller for years.by patches - Forum
wilson's little american mod - 14 years ago
where did the motor that was used in this tractor go? by noticing a old pic of it ,this looks to be a ford 427 sohc.the way car collectors have driven the prices up,this motor should be worth a small fortune.to the right collector,this could be the most valuable,automotive based engine ever used in pulling?by patches - Forum
Re: Pulling-reference.com - 14 years ago
nice site dan , i look at the puller list every once in a while,and have yet to view the complete list.just to wonder where the vehicles have all went to.there must be outbuildings all over the country,with them in storage.by patches - Forum
Re: What do you pull - 14 years ago
i got started on a ih-h,moved up to a mta,both in a stock class.the switched colors to oliver green.pulled a 88 in open rpm classes in wpa-eastern oh,switched colors again to case,1175 in western pa,at 3000 rpms,and open rpms in ohio.my son now pulls a stock block open rpm garden tractor,and wants a big one,i might add.i can say,with pride that ,tractor pullers are the most kind and helpful groupby patches - Forum
Re: ran across these,not really old but pre cage 1-31 - 14 years ago
i have a few pics of dr.dirt,didnt tom reisinger pull that tractor.im thinking he was out of wellington ohio??by patches - Forum
Re: SM4WD at Bowling Green? - 14 years ago
im not a big truck fan,but i enjoyed watching the smfwd much better than the mfwd.by patches - Forum
Re: Custom 880 Oliver Toy Puller - 14 years ago
the little parts like the brakes and wheelie bars do you cast them yourself or are they from something else,like a model car.all of the models you have posted look very detailed and are very good replicas.by patches - Forum
Re: old pics - 14 years ago
nice old pics,thanks for posting them.im going to scan some more later tonight,if i get done early.by patches - Forum
timing marks-tape - 14 years ago
im looking for the timing marks on a peice of tape,like jegs and summit sell.i need this for a 9 inch diameter,most other diameters are widely available,except the nine inch.by patches - Forum
Re: 92 super stock nfms vida - 14 years ago
thanks for the vids,there awesome!!!!by patches - Forum
Re: Looking for dvds - 14 years ago
eastern extreme,has the oops series listed on there videos section.i looked under 2009,there is 6 different ones listed,also some packages are available.there site is listed under pulling related links on this site.by patches - Forum
Re: could this be the kohls tractor ih-856 - 14 years ago
do you mean the 06-56 series ih with the homemade grill and holes chopped in the hood.by patches - Forum
Re: SBJD in a 3010 or 3020 chassis pros or cons????? - 14 years ago
this was a topic a few months ago.the correct bellnousing ,along with some other options were given.if you do a search it shouldn't be to hard to find.by patches - Forum