Page 3 of 4
Pages: 1234
Results 61 - 90 of 108
I was wondering if anybody has a MW set up off a 5488or1680 combine.would like pump,lines,&inner cooler.thanks Tim
by
foreverred
-
Forum
I really miss that tractor to.it was awesome.Bartie is a real nice guy and a diehard red guy.wish he wld make it a light pro
by
foreverred
-
Forum
I was wondering how you were going to get 500hp out of an mw pump.they were on late 5488s and 7140 magnums.you couldn't get much over 300hp out of them stock.I would just put an p pump or 7100 on it.also why did u have turbo problems with you're PSD?we have h2 holsets on our psds.we got them from hypermax with bigger injectors and tuner.we have any turbo problems.
by
foreverred
-
Forum
361&407s are 1.6 400 series are 1.5
by
foreverred
-
Forum
buy a 6.4 and then you'll have the best of everything.
by
foreverred
-
Forum
no they had mw pumps on combines.the smaller mx magnums had 7100s on them.the kit from area diesel to replace the caps pump also is a 7100 pump.i cant remember if the middle serial number 2388s had 7100s on or mw pumps.the later serial number 2388s had common rail on them.
by
foreverred
-
Forum
i didnt know you drank good beer like that!
by
foreverred
-
Forum
pretty sad when you can buy a billet wheel 4.1 from columbus for around 5 grand.kind of crazy to spend that much on a 3x3 but if thats what you pull i guess thats what you have to to keep up!
by
foreverred
-
Forum
yes very sad news.he was a great guy and forgot more than most people will ever know.he was a tremembous help to us when we started pulling.
by
foreverred
-
Forum
do you need the big pins or small ones?we have some small pin rods
by
foreverred
-
Forum
we use to run 429 pistons,they are 4.5 bore.that makes a 441.you just have to pull the sleeves and bore it a little.this combination works well.
by
foreverred
-
Forum
we machined the corner off our selves.it wasnt perfect the way we did it but it worked fine.we still run a 407 in a 1206 also.if you wld like to talk call my brother or i.319-240-6493 or319-240-6163
by
foreverred
-
Forum
we weighed a early 706 bare castind and a late 806 bare casting.there is no difference
by
foreverred
-
Forum
hey jason the tractor sounds good.seen it at new hampton&monticello.did you get it to stop bouncing and go straight?
by
foreverred
-
Forum
i would really like to see the light pro stock class in iowa,wis.and mn.
by
foreverred
-
Forum
have you had the truck long?did it use to get better then fall off or did you just get it and think it should get better?there is alot of thinks that hert fuei milage.
by
foreverred
-
Forum
we are from iowa and they do our work for us.they treat us great.the turn around is good for being so far way.we run a p pump though.they are great people.
by
foreverred
-
Forum
how much did you have take out of the cam.we have one with 5.42 stroke and billet rods.the fods have alot smaller journal diameter than stock.we stii had to machine the corner of the lobes off to clear.
by
foreverred
-
Forum
540 with cooler and any turbo!
by
foreverred
-
Forum
let everyone have a p pump!
by
foreverred
-
Forum
carl sold his tractor and miller's was still sitting in the shed last i new.
by
foreverred
-
Forum
yes,there is quite a few hc5's trimmed.we had one with a 3.6 tipped to 3in.it worked real well.the guys in missouri use run them alot i done know if they are yet or not conner's made them.we got our's from john davis.
by
foreverred
-
Forum
what are you're rules and what classes do you pull in?
by
foreverred
-
Forum
if you are useing a coopper gasket,it doesnt crush.
by
foreverred
-
Forum
we use valspar paint.2150 is in there computer and we used base clear.it looks really good.
by
foreverred
-
Forum
T18a95 has like an 3.5 intake and 3.8 ehaust wheel.i think they make some different size wheels though.the ones that i have seen have been that size.
by
foreverred
-
Forum
could somebody give me Daluges number please.thanks
by
foreverred
-
Forum
we have a couple of 407 cranks stoked to 5.43 ithink.I'll to look when i get home for sure.we had rods made.The ends are smaller for more clearence.we put sleeves in the block, had to notch them so we could pull the cam out.we also had to machine the corner of the cam lobes off for the rods to clear.the problem with this combination was the rod brgs.they were to small.i think the bore size e
by
foreverred
-
Forum
we run everything dry and no hard block.we run the pistons pretty loose though, .020 clearence.sure is alot nicer to work on without water.
by
foreverred
-
Forum
monti. sports 319-465-5429
by
foreverred
-
Forum
Page 3 of 4
Pages: 1234