10:23:28pm, Tuesday, May 14, 2024
hydrolic loss problem
|
Anonymous User
|
i have a 4010 john deere that i pull and i lose my steering and brakes when i take off and the only way they come back is to shut the tractor off and start it back up. any solutions to this problem would be a help |
Re: hydrolic loss problem
|
check the sump screen |
Re: hydrolic loss problem
|
Anonymous User
|
if its the screen tube on bottom below filter i cleaned it |
Re: hydrolic loss problem
|
4010
|
u still running factory front end? if so there is a screen on top of the front pump. i used a cutting tourch to cut a hole in the cover-frame that the front pump bolts to and remove the hex plug (1 1/8 socket i beleive, been a few years since i cleaned mine!! lol) with a screen under it and clean it. it will have metal from the brakes in it. that part of pump does not pull filtered oil from main filter system and it is used for steering and brakes only. . u can see hex plug from drivers side by radiator and fuel tank but u cant get to it and remove it unless u take front pump out or u cut a hole on top of the plate!! there is 2 hex plugs there but only one will have a screen and i beleive if i remember rite it is the more on top?
hope this will helps, it did in my 4010 dirk |
Re: hydrolic loss problem
|
Anonymous User
|
your supply pump stops turning when you push your clutch in,if your acculumlater is gone maybe your losing to much pressure. |
Re: hydrolic loss problem
|
Registered: 07/11/2008 Posts: 326 |
Did you remove your Hitch and SCV's? Did you just cap off the supply line for the Hitch and SCV's?
Bryan |
Re: hydrolic loss problem
|
Anonymous User
|
my hitch is still there all i took out it the oil cooler and control valve. im running the stock pump but have a home made wide front that uses hydrolic cylinder to turn i just run the lines tht went to the steering motor to the hydrolic cylinder. |
Website Statistics
Global: Topics: 38,757, Posts: 229,914, Members: 3,336.
This forum: Topics: 37,092, Posts: 226,013.
Global: Topics: 38,757, Posts: 229,914, Members: 3,336.
This forum: Topics: 37,092, Posts: 226,013.
Our newest member DANNY.WAINSCOTT@YAHOO.COM