epoxy?? January 01, 2012 04:13PM
anyone ever use a product called,lab metal,manufactured by ,alvin products.im contemplating trying some for porting,claims to be good to 1000 degrees.what kind of epoxies are you guys using.
Reply Quote

Re: epoxy?? January 01, 2012 04:39PM
AB epoxy from moroso. Its made for porting. Its been in the intake ports of our command vtwin heads in our 45cid roller motor for two years.
Reply Quote

Re: epoxy?? January 01, 2012 04:59PM
Splash Zone works well for intakes, No epoxy in exhaust.

Bret Powell
Reply Quote

Re: epoxy?? January 02, 2012 03:06AM
ive haerd others use the moroso a-b mix.this will be going on the outside of the port,probably end up being a 1/4-5/16 of an inch thick.then most of the cast iron will be ground out from inside.
Reply Quote

Re: epoxy?? January 02, 2012 07:48AM
PAtches we have it on the outside of port and the inside of the port on the intake ports of our vtwin and I use it on cast iron ports on the k series kohlers and tecumseh flatheads.
Reply Quote

Re: epoxy?? January 02, 2012 09:06AM
thats were id be using this on a k series,thanks vtwin puller.you going or pullin in columbus this weekend?we are hookin both days..
Reply Quote

Re: epoxy?? January 02, 2012 02:55PM
I will be there Friday. Watching my buddy with his smoker. We dont have our back together after getting freshend up. We wanted to run the 52.5 class but just dont have the time right now to get the tractor back together. We run a 45cid roller motor.

Dennis
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,777, Posts: 229,949, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,034.

Our newest member Jacklovik2009