4010 transmission January 15, 2012 10:13AM
How much hp/torque can a stock 4010 transmission hold? I am curious on how long I have before I need a three speed. This is on a 3000 rpm tractor. Thanks
Reply Quote

Re: 4010 transmission January 16, 2012 10:56AM
Does anyone run the stock tranny or do you do straight to the three speed?
Reply Quote

Re: 4010 transmission January 16, 2012 11:52AM
You can run the stock tranny but depend on the horsepower you run. Most people the the 3 speed cause of the gear ratio. Going from 7th to 8th is a big difference.
Reply Quote

Re: 4010 transmission January 16, 2012 11:50AM
what class and cubes
Reply Quote

Re: 4010 transmission January 16, 2012 12:54PM
466 cubes with a 2.5 turbo pulling 10000 to 14000 lbs
Reply Quote

Re: 4010 transmission January 17, 2012 05:17AM
If you have to run 6th I'd give it 50/50 on the low range pinion holding up. If you're running 5th, 7th, or 8th where you're using the high range pinion you should be fine. Putting another ratio in to replace 5th and/or 8th can be done much more reasonably than a complete 3 speed if you're on a budget.
Reply Quote

Re: 4010 transmission January 17, 2012 10:37AM
It is surprising how much they will take. We used to run bout 600hp thru ours. The thing that hurts it is when the tractor gets squirrly and ya lift up a back wheel and crunch! There goes some gears! If ya can keep the back tires on the ground it will hold for a long time.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,777, Posts: 229,948, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,033.

Our newest member Jacklovik2009