10:12:56pm, Saturday, May 04, 2024
NQS 1150# Open SUPER STOCK Diesel Class
|
JD Pulling
|
Questions for those that are pulling in this class:
What type of transmission and clutch is commonly used in this class? Where is a good starting point when choosing an engine (yanmar? kubota? etc....) Rules around here say I can run up to 92 cubic inches. ( If that helps) Do you reccomend using a component chassis? Or a stock garden tractor chassis like a cub cadet? Thanks in advance! |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Anonymous User
|
NQS open superstock:75 cu in., use cub trans with planateries,componet type chassis,clutch your choice,yanmar strongest but don't live. |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
JD Pulling
|
What engine do you suggest going with?
The two classes that are around this area are a 66 ci and a 92 cubic inch limit. Not sure what direction to head to as there is not anyone in this area that has diesel garden pullers. |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Use the Yanmar 3TNE84. It's 91.5 cubic inches. The rods suck and need work, But you won't break the block like a 3TNE78. The Yanmar is direct injected while the Kubota in an indirect injected engine. HUGE difference. Plus the Kubota uses a cam box style pump that is limited on it's output and costs big bucks to make work. The Yanmar uses a external injection pump and has many options to get tons of fuel. |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
JD Pulling
|
Thank you for the info! |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Anonymous User
|
Not sure where you are located, haven't heard those specific rules and have built parts for diesel garden tractors from Maine to Colorado. If you are thinking of pulling at NQS series or Columbus Winter Nationals you may want to build something that falls into their rules.
I see guys build these things all the time and don't build to a specific set of rules and then have no place to pull in a class w/o pulling exhibition. Just sayin. Have fun whatever. www.iceman-motorsports.com |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
CAT
|
What about the little CAT's that they are putting in dixi choppers and bad boy mowers? external in-line pump from the out side looks like it would be a cool little motor to put in a puller!! |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Anonymous User
|
cat engine 1.6L= about 100 cu in. alittle too large for NQS! |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
CAT
|
What are the guys useing ov seas for there small diesel tractors?? look like there making a lot of power over there |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Anonymous User
|
VW TDI or Peugeot. Those are more a compact tractor class, not a garden tractor class, two different animals. |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Registered: 02/07/2012 Posts: 60 |
Who all makes parts or works on pumps for these compact diesel tractors?? |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Anonymous User
|
We make a number of parts. Columbus Diesel and Scheids do pump and injector work. If allowed, 3 cyl Bosch A pumps are grafted on.
www.iceman-motorsports.com |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Registered: 02/07/2012 Posts: 60 |
Could yall build a tube chassis? |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Anonymous User
|
Not legal anywhere around here. |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
As stated early you need to figure where u want to pull. Most guys don't like to travel 3 to 12 hours or more to a pull.
Nqs offers a set of rules that allows tractors from across the midwest to pull competitivly at various events through out the year. The rules are tailored towards tractors that are pulling a sled built for the speed and weight of 1/4 scale tractors. If you are interested go NQS pulling.org and click on rules. |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Registered: 02/07/2012 Posts: 60 |
Thanks. What brand of chassis are people useing, Cub cadet, john deere.... etc. |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Anonymous User
|
I think most are using fabricated chanels,rails are possible legal if covered. Check NQS website. |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Anonymous User
|
oops,met to say tube frames if covered,check NQS. |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Registered: 02/07/2012 Posts: 60 |
Ok. do you pull one of these mini diesels? |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
JD Pulling
|
Little Smoker,
What Planataries are being used in these tractors with the Cub trans.? |
Re: NQS 1150# Open SUPER STOCK Diesel Class
|
Anonymous User
|
Andy Koporal builds the planataries,located in IN.Have ran them sveral years,bullet proof! |
Website Statistics
Global: Topics: 38,697, Posts: 229,795, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,949.
Global: Topics: 38,697, Posts: 229,795, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,949.
Our newest member CBeard