pull on march 10th February 24, 2012 11:58AM
is there a pull in march in nebraska?
Reply Quote

Re: pull on march 10th February 24, 2012 01:00PM
Yes, its up at the Northeast Community College Ag complex in Norfolk.
Reply Quote

Re: pull on march 10th February 24, 2012 01:54PM
Do you have any info for what they are running for the 3000 rpm weight classes and the track length?
Reply Quote

Re: pull on march 10th February 24, 2012 02:04PM
Last year, track length was about 160', further than that & you have rear tires up on concrete trying to do a burnout. Pretty sure the 3000 RPM classes will go up to the 9700 lb class.
Reply Quote

Re: pull on march 10th February 25, 2012 01:12AM
Is there a site with info
Reply Quote

Re: pull on march 10th February 25, 2012 02:30AM
Quote
Mark
Is there a site with info

I don't believe there is.
Reply Quote

Re: pull on march 10th February 26, 2012 01:26PM
Yes there is a page about the tractor pull on March 10th in Norfolk, NE under the events tab on this pull off site. The 3000 RPM classes will run from 5700lbs to 9700lbs. The track is about 180 feet long. If you have anymore questions you can call me at 402-533-3380.
Reply Quote

Re: pull on march 10th February 26, 2012 02:27PM
For those of of us challenged, click on links first, then you will see events, then look for Norfolk, Ne. tractor pull. Billy some of us are slowwwww!
Reply Quote

Re: pull on march 10th March 04, 2012 01:10PM
Is there going to be many light 3000 rpm tractors going? 7500 lbs
Reply Quote

Re: pull on march 10th March 04, 2012 03:30PM
Looking like there is going to be 5 that i have heard from for sure and have had interest from quite a few more. Looks like the weather should be good so I am expecting a big turn out.
Reply Quote

Re: pull on march 10th March 10, 2012 01:20PM
any one have any 3000 rpm results?
Reply Quote

Re: pull on march 10th March 10, 2012 02:04PM
No results, but I must say, good job to the guys who put the show on up there, the two sleds worked very well, and made for a good show. Hope they don't make ya have to get a smoke tube next year!Drinking
Reply Quote

Re: pull on march 10th March 11, 2012 08:24AM
Is there a place we can find the results?
Reply Quote

Re: pull on march 10th March 11, 2012 01:47PM
6700 LB 3000RPM 1.Jim Jensen 3020 Full Pull 2.Jared Dubbelde 4020 165.75ft 3.Jacob Korth IH 786 160.12ft 7700 LB 3000RPM 1. Jarrod Hagena 4255 Full Pull 1.Jared Dubbelde 4020 Full Pull 3.Andrew Meister 886 164.20ft 8700 LB 3000RPM 1.Mitchell Larsen 4255 Full Pull 2.Trevor Spenner 886 168.67ft 3. Allen Shellum 4455 164.79ft 9700 LB 3000RPM 1.John Narigon 4455 132.97ft 2. Allen Shellum 4455 127.51ft 3. Alex Harms 1175 120.34ft I wanted to thank everyone for coming out to pull we had an awesome turn out we had 323 hooks and we were done pulling by 5:30 that is a new record for us. We are planning the pull for next year but we are going to have to work out something for the smoke but otherwise the pull went great. Thank You Again
Reply Quote

Good job GPTP Guys March 11, 2012 01:58PM
Looks like the 2 Deeres out of SD in the 7700 lb class are still running as close as they did all last summer. Wish I could have made it down to watch.
Reply Quote

Re: Good job GPTP Guys March 12, 2012 02:58AM
What classes did you guys run? Thanks
Reply Quote

Re: Good job GPTP Guys March 13, 2012 12:00AM
Hey Narigon the only reason you did that good in Norfolk was because the big scrap iron express wasn't there mawahahahahahaha.
Just kidding man awsome job with the Big John DeereSmiling can't wait to see you guys and everybody else on June 1 in Rock Valley. Till then take care.
Reply Quote

Re: Good job GPTP Guys March 13, 2012 02:16PM
next year they need to separate the big motors from the small ones in the 3000 rpm classes



Edited 1 time(s). Last edit at 03/13/2012 02:29PM by Big Red Binder.
Reply Quote

Re: Good job GPTP Guys March 14, 2012 01:45AM
Can you please explain the motors in the 3000 rpm class, did some of the tractors have bigger than 466 or do you want a small cube class being smaller than 400? About how many tractors were in the 3000 rpm classes?
Reply Quote

Re: Good job GPTP Guys March 14, 2012 02:01AM
Northeast pullers have two different 3000 RPM classes, a light and a heavy class. Both of them overlap at 7700 pounds. The light class has a cube limit of 360 on a turbo engine, the heavy class has a cube limit of 466. The light ones pull from 5700 to 7700 pounds, and the heavy ones pull from 7700 pounds on up. Just so happened at the college pull this year, they didn't separate them, if you weighed 7700 lbs, whether you were a light 3000 or a heavy 3000 tractor, you pulled in the same class.

Think there were 5, maybe 6 in the 7700 lb class, and 7 in the 8700 lb class.
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,775, Posts: 229,944, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,031.

Our newest member Jacklovik2009