john deere engine
|
4430
|
I bought a john deere 9500 combine engine and want to put it in a 4430. After i bought it,i was informed that some of the 9500 engines had a bigger timming gears and cover forcing it not to work to well in the tractor do to the hydro pump that has to bolt to the front. How do i know if i have the bigger gears and if i do, what can i do to fix the problem. Its for a farm class tractor and i'm new at this. Thanks |
Re: john deere engine
|
Registered: 03/12/2010 Posts: 405 |
The bigger of the two covers,covers practically the whole front of the engine. The smaller one, covers just the gears. |
Re: john deere engine
|
4430
|
If i have the bigger one how could i make it work. I have the 404 to exchange parts on. |
Re: john deere engine
|
Registered: 03/12/2010 Posts: 405 |
The 404 cover will not work, if the gears are bigger. You should be able to cover the holes that you don't need, to keep the oil from coming out. |
Re: john deere engine
|
4430
|
dont understand. can this big timing gears be installed and still run my hydro pump |
Re: john deere engine
|
years past.
|
Yes you can still use your hydraulic pump. I installed this same wide gear drive engine in a 4230. The 4230 is a lot shorter frame.
You just have to either make a new drive system or mix and match parts from other deere tractors to make it work. I think I used the factory 9500 drive of off the dampner and used a drive coupler from a 4010 on the pump side. |
Re: john deere engine
|
4430
|
Thank you for the info. Did you run a electric fan then. |
Re: john deere engine
|
years past
|
At first I I had to run the stock fan or at the least a stock appearing due to an IDIOT president of the organization. As soon as they allowed electric
I fans I switched. |
Re: john deere engine
|
4430
|
How did you run a stock fan or is there a Number i could call you on and ask a few questions. |
Re: john deere engine
|
john deere
|
Can a guy use the same flywheel from a 4430 on that motor |
Re: john deere engine
|
4430
|
any other help would be nice. thank you for all the other info |
Re: john deere engine
|
deere
|
can the exhaust from the 404 work on that motor or should i use a different one |
Re: john deere engine
|
maybe
|
i ran the same set up but i used the 404 timing cover with a spacer made to make it fit the wide gears. had one made for $300. then used the 404 water pump and fan with a spacer for the pump. works good had no trouble with it. If you want one let me know |
Website Statistics
Global: Topics: 38,675, Posts: 229,776, Members: 3,327.
This forum: Topics: 37,078, Posts: 225,949.
Global: Topics: 38,675, Posts: 229,776, Members: 3,327.
This forum: Topics: 37,078, Posts: 225,949.
Our newest member Jason