Dt360 manifold Ag type? November 13, 2012 02:49PM
Ok what Ag manifolds fit a dt360 I know there will not a turbo flange that's ok what tractors other than 886 and 766 tractors will fit thanks guys.
Reply Quote

Re: Dt360 manifold Ag type? November 14, 2012 01:11AM
666 & 686 with the D312 use the same exhaust manifold as the 766 & 886 with D360's
Reply Quote

Re: Dt360 manifold Ag type? November 14, 2012 01:05PM
What about combines?
Reply Quote

Re: Dt360 manifold Ag type? November 14, 2012 01:59PM
I believe the only combine to use the D360 was a IH 453 Hillside model, good luck finding one of those!!
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 04:49AM
Yes I'm looking and what about a combine with a d312?
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 09:05AM
They used the German 310 and 358 in combines, but I don't know of any 312 or 360 powered combines or cotton pickers. I think there were a few construction applications with the factory turbo manifold, but good luck finding one.
Reply Quote

Re: Dt360 manifold Ag type? November 14, 2012 02:38PM
Are you looking for a manifold?
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 05:43AM
Yea I'm yea I'm looking for 1
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 10:12AM
And you are ok WITHOUT the turbo flange? I have a couple of those.
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 01:29PM
3088, 3288 had the german neuss 358.
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 02:10PM
Will the 358 manifold fit a 360?
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 03:19PM
No it wont. Totally different motor.
Reply Quote

Re: Dt360 manifold Ag type? March 18, 2013 03:30PM
I would like a turbo manifold for 360 motor on 766 920-296-4250
Reply Quote

Re: Dt360 manifold Ag type? March 22, 2013 11:55PM
Wow...

The 2005 cummins is not a 12v... Its a 24... The 312 and the 360 match... Those manifolds are probably most easily found on 656 and 666 international diesels... The manifold you want would probably work off your truck but will require grinding and it still won't have charger mounted where it belongs. If it were me I would grab a manifold off of a schoolbus with the truck DT360 in it. Flip manifold and mount with charger base facing up. Then cut it off completely flush with top of manifold log.

We then build a tower using 1/4 inch plate steel and a T4 mounting base. We did keep the dual chamber and when done we went back in through T4 flange and ground all corners down with long acorn style grinding bit.

Came out very nice and have used it multiple seasons without issues.

Better be a good stick welder... The mig doens't work well on heavy old cast...

ON A SIDE NOTE... What are you doing with the commonrail engine in the smashed up 05 dodge?
Reply Quote

Re: Dt360 manifold Ag type? April 14, 2013 07:15AM
The block is cracked on one side of the cummins motor bell housing broke on the other side motor and tranny completely split when I crashed it
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 12:31PM
Didnt the 3288 have the 360 motor in it?
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 04:05PM
No, it had the 358 which was a german diesel.
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 04:22PM
To see a http://www.mmolive.com/ and http://www.mmohome.com/ world in a granda of Buy Diablo 3 Gold stand.And a heaven in a wild flower.Hold infinity in the palm your hand and eternity in an hour.
Reply Quote

Re: Dt360 manifold Ag type? November 15, 2012 11:46PM
Does it have to be an Ag manifold? School bus and truck 360 engines are everywhere that has the turbo flange
Reply Quote

Re: Dt360 manifold Ag type? March 18, 2013 04:10PM
I made my 312 TURBO manifold from a DT360 truck manifold (the round 2 piece) bottom and the upper flange from a 1066 manifold. I cut the flange off of the truck manifold and welded the 400 series top to it. The class I was running required a stock appearing manifold and there was no engine shields. If you dont need a stock appearing manifold you can modify a Dodge Cummins 03-07 5.9 manafold to work. The easiest is a ATS two piece aftermarket manifold because the 360 IH engine is just a bit longer. This modification will take some port die grinding to match things up. [www.peakdieselperformance.com]
Reply Quote

Re: Dt360 manifold Ag type? March 22, 2013 03:05PM
That will work great then smashed my 05 dodge dually couple years so i can just take manifold off and don't have to find one and buy it thanks for the help
Reply Quote

Re: Dt360 manifold Ag type? March 22, 2013 05:29PM
Quote
Casey766
That will work great then smashed my 05 dodge dually couple years so i can just take manifold off and don't have to find one and buy it thanks for the help
Sorry mis read your line. The Stock manifold from your 05 truck can be made to work, but it will be a bit short. The aftermarket two piece manifolds will work much better as you can drive the slip apart just enough to help line up the ports.



Edited 1 time(s). Last edit at 03/23/2013 02:48PM by gonzo 1066.
Reply Quote

Re: Dt360 manifold Ag type? April 14, 2013 03:49PM
The stock fuel tank is in the wrong place for the turbo to exit to the back. It will take some creative thinking to make it look stock with a turbo under the hood if you use the stock fuel tank.
Reply Quote

Re: Dt360 manifold Ag type? April 14, 2013 10:05AM
And could i get some pics please
Reply Quote

Re: Dt360 manifold Ag type? March 23, 2013 01:15PM
There was a turbo manifold for a 360 in a cottonpicker in the late '70s early '80s.
Reply Quote

Re: Dt360 manifold Ag type? April 14, 2013 10:03AM
Did anybody's setups work with stock fuel tank planned on leaving that on and don't seem to be much room to work with
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,682, Posts: 229,784, Members: 3,328.
This forum: Topics: 37,078, Posts: 225,950.

Our newest member Jason