Wilwood Master Cylinder size for 120-6818 Caliper??? January 02, 2014 06:05AM
I know this has been on here before but I cant seem to find it. What size master cylinder have you guys had success with in conjunction with the 120-6818 four piston calipers? I was thinking 3/4" The input will be appreciated. Thanks Jeff

Re: Wilwood Master Cylinder size for 120-6818 Caliper??? January 02, 2014 06:28AM
I always use the one inch bore wilwood master cylinder. 260-6766

Re: Wilwood Master Cylinder size for 120-6818 Caliper??? January 02, 2014 07:10AM
Does the 6818 have the 1/8 inlet on both sides? I bought a set of caliper brackets but the 6817 calipers have the inlet on the housing side and the fitting hits the brake housing. Any pics of the 6818 setup?

Re: Wilwood Master Cylinder size for 120-6818 Caliper??? January 02, 2014 07:24AM
In the kits I sell, I use the billet dynalite caliper 120-5081. They are about $30 higher then the forged but have 1/8th outlets on either side. You can also plumb into one of the bleed fittings in the side, makes it a little harder to bleed but will work.

Re: Wilwood Master Cylinder size for 120-6818 Caliper??? January 02, 2014 07:43AM
Thanks. Wilwood customer service just told me that the Dynapro, 120-9695-SI, caliper that has the outboard, side inlet as well.

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,670, Posts: 229,762, Members: 3,327.
This forum: Topics: 37,076, Posts: 225,938.

Our newest member JD_8520