12:32:28am, Thursday, May 02, 2024
Wilwood Master Cylinder size for 120-6818 Caliper???
|
Registered: 03/27/2008 Posts: 36 |
I know this has been on here before but I cant seem to find it. What size master cylinder have you guys had success with in conjunction with the 120-6818 four piston calipers? I was thinking 3/4" The input will be appreciated. Thanks Jeff |
Re: Wilwood Master Cylinder size for 120-6818 Caliper???
|
Registered: 03/15/2010 Posts: 158 |
I always use the one inch bore wilwood master cylinder. 260-6766 |
Re: Wilwood Master Cylinder size for 120-6818 Caliper???
|
Registered: 04/28/2008 Posts: 20 |
Does the 6818 have the 1/8 inlet on both sides? I bought a set of caliper brackets but the 6817 calipers have the inlet on the housing side and the fitting hits the brake housing. Any pics of the 6818 setup? |
Re: Wilwood Master Cylinder size for 120-6818 Caliper???
|
Registered: 03/15/2010 Posts: 158 |
In the kits I sell, I use the billet dynalite caliper 120-5081. They are about $30 higher then the forged but have 1/8th outlets on either side. You can also plumb into one of the bleed fittings in the side, makes it a little harder to bleed but will work. |
Re: Wilwood Master Cylinder size for 120-6818 Caliper???
|
Registered: 04/28/2008 Posts: 20 |
Thanks. Wilwood customer service just told me that the Dynapro, 120-9695-SI, caliper that has the outboard, side inlet as well. |
Website Statistics
Global: Topics: 38,670, Posts: 229,764, Members: 3,327.
This forum: Topics: 37,076, Posts: 225,940.
Global: Topics: 38,670, Posts: 229,764, Members: 3,327.
This forum: Topics: 37,076, Posts: 225,940.
Our newest member Jason