10:24:28am, Sunday, May 19, 2024
holley fuel pump
|
What holley fuel pump part # are people using when they say blue pump on 13 mm model 100 |
Re: holley fuel pump
|
opinionator
|
Look at a Summit Racing or Jegs catalog for a part number. Just FYI, if you have a good 13mm model 100 (450cc or more), that pump won't be adequate. |
Re: holley fuel pump
|
Probably dumb question would you run a regulator or straight to filter housing |
Re: holley fuel pump
|
Registered: 04/30/2008 Posts: 174 |
real world test stand results = with a 5 mm camshaft you will need min. 80 psi @ 2.5 gpm. prefer 100 psi . go belt drive. hyper has a nice setup just for that and it works !! best if you have a dual feed hsg. and a good pump builder will use a head with extra charge port holes for better port filling.with a single plunger doing all the work, there is very little time to charge the plunger inlet port,,there is a sprayer pump. 12 volt that will supply the flow and pressure, but it will have a short life in this application |
Re: holley fuel pump
|
12-802 is the blue. I prefer the black 12-815, but I carry the BigEnd generic version which is much less $, and still made by holley, and has metal blades unlike the procomp knock-offs. |
Re: holley fuel pump
|
I have a pump you might be interested in the for sale section . A big holley and a big Barry Grant. |
Re: holley fuel pump
|
Registered: 04/30/2008 Posts: 174 |
that pump will not have near enough flow to supply 13 mm..head seizure is very probable |
Re: holley fuel pump
|
So what would you recommend on a buget |
Re: holley fuel pump
|
Registered: 08/21/2008 Posts: 590 |
Aeromotive A1000. May not seem cheap right away, but it'll have the flow, so its cheaper than seizing a head in a 13mm rotary........... |
Re: holley fuel pump
|
Probably dumb question but would you need regulator or just run it straight to filter housing |
Re: holley fuel pump
|
The blue Holley electric pump we called it a 110 Holley 110 gallons an hour I think it was more for a gas motor than diesel I ran an external regulator.It would feed two 1150 Dominator 4 barrel carbs truck pulling 614 Ford in the early 1980's. The red 110 Holley had a built in regulator flowed a little less 108 gph worked good with one 4 barrel on my old super stock Dodge 482 cid never ran out of fuel. |
Re: holley fuel pump
|
puller 1
|
on a model 100 you are in need of more psi than gpm this aint your dads gasser |
Re: holley fuel pump
|
Yes you need to be running 80lbs pressure down the track, put a belt drive pump on and be done with it. 13mm pump takes pressure to work. |
Re: holley fuel pump
|
The holley pump is for gas only and it's maximum pressure is 14 psi no where near what you need a great pump to feed carbs on race gas none the less. |
Website Statistics
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Global: Topics: 38,779, Posts: 229,957, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,040.
Our newest member Jacklovik2009