09:25:12am, Saturday, May 18, 2024
stock case tractor
|
Looking for opinions I want to get a stock case farm tractor to pull from 9500 lbs and up, any ideas or suggestions? |
Re: stock case tractor
|
Registered: 04/06/2010 Posts: 139 |
Get an 8 speed. No powershift. That means a 930, 1030, Some 970s and 1070s, or an 1175. 1175 is heavy. I just happen to have a straight stock 1030 for sale. Should be a bit under 9500lbs with no weights. |
Re: stock case tractor
|
wilkca 504 bolt into that? |
Re: stock case tractor
|
Registered: 07/16/2015 Posts: 55 |
Your best going with a 1175. The 504 bolts right in, comes with an A Pump and straight 8 speed. They are heavy but if you go to the stamped steel wheels you can get it well under 12000 and have weight to move around. |
Re: stock case tractor
|
i was thinking about a 1370 the motor sits out 12" further than the other 70 series,any advantages? I was looking at 11,500to 16,000 lb class |
Re: stock case tractor
|
Registered: 04/06/2010 Posts: 139 |
Just bought a 1370 today. They are a heavy pig, and the power shift is not a good idea for a puller. Would last forever in the field if maintained right, but you'll not be happy with it in a puller. |
Re: stock case tractor
|
did they make a 1370 gear drive? |
Re: stock case tractor
|
Registered: 12/16/2010 Posts: 67 |
No all 1370 are power shift |
Re: stock case tractor
|
Jerry he
|
Think I could hide an Oliver over under shift inside a gutted case-o-matic tube all in front of an eight speed rearend?
I have heard the over under can be made to hold a lot of hp. |
Re: stock case tractor
|
rt
|
Bump power shift pressure up to 350 psi and you will have NO problems! |
Re: stock case tractor
|
how do you bump up power shift pressure? What would that do? |
Re: stock case tractor
|
rt
|
You don't want the power shift to slip. Kinda like a shift kit, it will hold better under higher power.You do not want the torque limiters to slip and warp. If you don't know how to turn up the pressure then take it to a dealer and they can put gauges on it and shim it till you get to 350 psi. |
Re: stock case tractor
|
Registered: 07/19/2008 Posts: 145 |
use a 2090 or 2290 rearend with an 8 spd. transmission then |
Website Statistics
Global: Topics: 38,777, Posts: 229,949, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,034.
Global: Topics: 38,777, Posts: 229,949, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,034.
Our newest member Jacklovik2009