Case heads September 13, 2015 02:15PM
Looking to talk with someone about case heads
Reply Quote

Re: Case heads September 14, 2015 01:02AM
Interested myself in any information about case 504 hot farm stock heads
Reply Quote

Re: Case heads September 14, 2015 11:13AM
I am interested in this as well.
Reply Quote

Re: Case heads September 14, 2015 12:38PM
Talk to Karl con
Reply Quote

Re: Case heads September 14, 2015 03:12PM
Karl will be able to help you put together something that will run open rpm or over 3500 or so. Anything that I have seen from Karl outside of that kind of falls short when compared to the IH or Deere on the same playing field.

Some one needs to look at the size and shape of a Case cylinder head. The cross section of intake and exhaust is proportionately HUGE compared to related other colors. The ports are too big and are poorly shaped.

Find the guy with a flow bench and that is willing to fill the ports and speed the air up and direct the swirl where it needs to be. That is the guy you are looking for. The potential is there, someone needs to step outside the box and work in that direction.
Reply Quote

Re: Case heads September 14, 2015 11:43PM
We can do the work to heads. But do not have the knowledge for what it takes to make it work. And do not have anyone local that does.
Reply Quote

Re: Case heads September 14, 2015 11:51PM
performance cylinder head 423-554-5149
Reply Quote

Re: Case heads September 15, 2015 01:05PM
try Elmer Haug and ken veney
Reply Quote

Re: Case heads September 16, 2015 02:37AM
, 10 point post your phone # and I will tell you how its done
Reply Quote

Re: Case heads September 16, 2015 02:06PM
Eagle are you a engine builder for Case pullers . I would love to know more . Where are you located at . I am trying to beat those red & green tractors . I call REI he said there are 3 problems with a case and they all set on the top of the block any help would be great .
Reply Quote

Re: Case heads September 15, 2015 01:26PM
I have been happy with Chuck Lewis.
He has done both my 451 and 504.

He does some big name heads and they consistently perform.

Chucks Cylinder Heads
812-325-4518
Reply Quote

Re: Case heads September 16, 2015 09:13AM
Does anyone else have any feedback on Chuck Lewis
Reply Quote

Re: Case heads September 16, 2015 04:46PM
Chuck has done a lot of heads,very smart guy,would recommend him for any kind of head work
Reply Quote

Re: Case heads September 16, 2015 05:11AM
stock 504 heads have very big ports with lots of swirl. they need to be ported in order to get flow for bigger cubes. if the cubes are smaller the ports should be tightened up
Reply Quote

Re: Case heads September 16, 2015 08:36AM
Quote
dgcasepuller
stock 504 heads have very big ports with lots of swirl. they need to be ported in order to get flow for bigger cubes. if the cubes are smaller the ports should be tightened up

For a 3000rpm 504 what do you reccommend?
Reply Quote

Re: Case heads September 16, 2015 09:58AM
504 3000rpm with a 3x3 all you need is a real good valve job don't do any port work at all. If you are running a small charger like a 3lm you can get by with the same head but it does benefit from closing the intake ports down some just be sure to take it to someone that is reputable and knows what they are doing. Case actually has a real good head for 3000 rpm if you are running a good charger. We make a lot of power with one.
Reply Quote

Re: Case heads September 16, 2015 02:25PM
Eagle are you a builder for case pullers . Where are you located at . Pulling a Case getting tired of getting beat by red & green any help would be great . Had a engine builder tell me there are 3 things wrong with a case and they set on top of the block . Any help would be great thanks .
Reply Quote

Re: Case heads September 16, 2015 02:38PM
Karl Kahn 262-719-9338
A Case can run with the Red / Green show. Karl has proven that.
Reply Quote

Re: Case heads September 17, 2015 01:35PM
Does anybody know who has used 451 heads and put the big injectors in them have even been told they use ih injectors also. I know the port sizes are smaller was looking for cfm. Comparisons I've heard all kinds of differing opinions was just curious. Thx
Reply Quote

Re: Case heads September 18, 2015 12:18AM
hoyts in the pa area, haugs in Kansas if I was really wanting a case I would talk to all of them for ideas.
Reply Quote

Re: Case heads September 17, 2015 01:38PM
Karl Kahn can't be the only person in the United States the knows how to build a case . I have heard a lot of good things that he has done with a case . But there has to be a lot of different ideas out there on how to make a case run at 3000 rpms and hang in there till 1800rpms or so .
Reply Quote

Re: Case heads September 17, 2015 04:42PM
rod schottle,savannah ,missouri
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,771, Posts: 229,938, Members: 3,338.
This forum: Topics: 37,096, Posts: 226,027.

Our newest member Jacklovik2009