Re: Best 13+mm model 100?

	Best 13+mm model 100? March 08, 2016 06:22PM
Blackstack 460 Registered: 04/22/2015 Posts: 63	Who builds the best rotary for a 2.8 charger? I hear Fair valley builds a good pump but want opinions. Reply Quote

	Re: Best 13+mm model 100? March 09, 2016 04:43AM
M100	Harts undoubtedly builds the best m100 rotary. I run one and am extremely satisfied. Reply Quote

	Re: Best 13+mm model 100? March 09, 2016 02:04PM
Indian givers friend	I'm happy with mine from St joes Reply Quote

	Re: Best 13+mm model 100? March 09, 2016 02:37PM
Hot binder	Scheid gotta a great one right now to puts out lotta fuel Reply Quote

	m8888ja reply March 09, 2016 02:48PM
Blackstack 460 Registered: 04/22/2015 Posts: 63	m8888ja i tried to PM you back but your inbox is full. Call me at 715-641-0612 Reply Quote

	Re: m8888ja reply March 10, 2016 12:37PM
m8888ja Registered: 04/30/2008 Posts: 174	you can pm me now Reply Quote

	Re: pump March 10, 2016 01:54PM
Blackstack 460 Registered: 04/22/2015 Posts: 63	The fair valley is also 500+cc. Snot Nosed Kid gave me the exact number but i forgot what it is now. Anything smaller than that and i ain't interested, so That looks like i need a harts or fair valley Reply Quote

	Re: Best 13+mm model 100? March 09, 2016 11:53PM
Anonymous User	HARTS my tractor has a 2.8 mines the blackstrip the other tractor has a rotary I'm not for sure what he's got but they run good! [m.youtube.com] Reply Quote

	Re: Best 13+mm model 100? March 10, 2016 01:25AM
Cody	What gear is that? Reply Quote

	Re: Best 13+mm model 100? March 10, 2016 05:13AM
Anonymous User	2 teeth over 3rd Reply Quote

	Re: Best 13+mm model 100? March 10, 2016 10:25AM
WyattB	so back on this topic, what are the St. Joes and Sheids pumps putting out for fuel? Reply Quote

	Re: Best 13+mm model 100? March 10, 2016 11:14AM
neilsroom Registered: 04/12/2008 Posts: 398	Brian Scott at Prarie Performance. Reply Quote

Re: Best 13+mm model 100? March 10, 2016 01:00PM

Jon B

I will second Bryan Scott we have had 3 model 100 done by him and always been very pleased.
A great guy to deal with and he will take time and talk to you.
With his system and a good 3LM turbo we was running direct @3000 rpms 466cid 20.8x38 single cut
Radial all tractions and spinning out with the T/A back in 9500-11500 12500-14500 we ran two teeth under direct
I'm sure the are all good pumps but I will go back to Bryan if I ever need another.

Reply Quote

	Re: Best 13+mm model 100? March 11, 2016 02:11AM
jt1066	The last pump scheid came out with be the one Chris mayhause designed yr or 2 ago. It's 13 mm 570 cc. His dad runs it on his 1466. He ran at gordyville this year I believe he got 2nd. It costs around 3500 I believe is what Chris told me last fall don't quote me on that it's just the number that's stickin in my head. Reply Quote

	Re: Best 13+mm model 100? March 11, 2016 02:50AM
Suits	But Harts pump got 1st Reply Quote

	Re: Best 13+mm model 100? March 13, 2016 01:56AM
jt1066	Mayhause is also only 466 cubes and what was the limit up there 540 or 600?? I know deere couldn't run the 619. I don't know anything about harts. I'm just tryin to help the guy out. He asked bought scheid and I know scheids, and i just gave him an example of there pump runnin Reply Quote

	Re: Best 13+mm model 100? March 11, 2016 03:17AM
Jon c	The harts my have won the class but you also have to consider who built the motor. ONE OF THE BEST there is more to tractor pulling then the injection pump Reply Quote

	Re: Best 13+mm model 100? March 11, 2016 07:48AM
Suits	Doesn't hurt that it's 505 ci either.... Reply Quote

	Re: Best 13+mm model 100? March 10, 2016 10:42AM
Anonymous User	Harts are 500-510cc all pumps very. Reply Quote

	Re: Best 13+mm model 100? March 10, 2016 10:53AM
M100	Also, the majority of Harts pumps are 13mm. I honestly don't think they build a 15 or 14mm headed pump. But, many say their 13 mm pump is better than a 15mm hyper rotary pump. Reply Quote

	Re: Best 13+mm model 100? March 10, 2016 02:35PM
Wicked Addiction Registered: 12/18/2015 Posts: 26	A guy in our club runs the st. Joes pump and it is very strong. I run a harts and him and I went back and forth for spots all summer. Reply Quote

	Re: Best 13+mm model 100? March 11, 2016 04:31AM
readman	St Joeph has the biggest rotary out there and there only 2 to 4 built . has to be 600cc plus in fuel Reply Quote

Re: Best 13+mm model 100? March 11, 2016 08:20AM

Dairy blend

Registered: 04/06/2008
Posts: 263

I think some people forget that what makes a pump 'good' is not just how many cc's it flows. A 15mm rotary is capable of lots of fuel but we all know they are junk. Harts has proved itself on the track for about 4 years now. Some of the other pumps may be good as well but if you want a sure bet for performance and reliability you buy the harts pump and plumb it just like Randy tells you to. Won't be disappointed one bit

Reply Quote

	Re: Best 13+mm model 100? March 11, 2016 11:05AM
wrench	Nothing wrong with hypers 15 just have to plumb it correctly as well. Most do not. And they do not run the correct lines and injectors. Even on second hand stuff why are people afraid to call the original builders? Reply Quote

Re: Best 13+mm model 100? March 11, 2016 03:28PM

Snot Nosed Kid

Registered: 01/03/2014
Posts: 25

I think it has to come down to what works best for YOU. Everyone has an opinion and the pump they have is always the best, but what it really comes down to is what you want and how you can make your tractor run. Whether you're flowing 500, 510, 550, etc. will be irrelevant if everything isn't working in harmony. You can make anything run if you work at it enough. Obviously pumps built by certain shops will tend to run better than others in general, but I don't think there is one pump that is the answer to any setup. just my two cents though.

Reply Quote

	Re: Best 13+mm model 100? March 11, 2016 08:57PM
deerepower	Any one have a set of 90 stainless lines for sale for a model 100 pump 13 mm Reply Quote

	Re: Best 13+mm model 100? March 11, 2016 11:21PM
Hey mammasmoney	What do you run for timing on that pump. I take it it sounds like a 3000rpm pump? Reply Quote

	Re: Best 13+mm model 100? March 12, 2016 05:20AM
Anonymous User	Yep 3000rpms it can range from 28-36 all motors are different Reply Quote

	Re: Best 13+mm model 100? March 12, 2016 06:00AM
13 mm puller	Who did your engine work on your tractor mamasmoney? Your tractor look like it really runs good. Did you have it dynoed to know where to set your timing? Reply Quote

Re: Best 13+mm model 100? March 12, 2016 08:52AM

m8888ja

Registered: 04/30/2008
Posts: 174

snot nose kid, your exctly correct. I have built pumps that flow 520cc , and some I built in the old days that flow 360,etc, and I have seen the lower flowing pumps beat the high output pumps more than once, everything has to work together, its a lot more than getting a lot of fuel in the cylinder, how fast and when you get it in means as much as how many ccs your pump flows, along with many other factors,

Reply Quote

	Re: Best 13+mm model 100? March 13, 2016 05:14AM
Anonymous User	Yep we ran her on the dyno Reply Quote

Newer Topic Older Topic

Print View RSS

Author:

Your Email:

Subject:

Help information

Spam prevention:

Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.

Enter code:

Message:

Website Statistics

Global: Topics: 38,670, Posts: 229,765, Members: 3,327.
This forum: Topics: 37,076, Posts: 225,941.

Our newest member Jason