need some help with turbo size March 18, 2016 01:43PM
Hi I have Ford 9600 farm stock. I had injection pump redone with 10.5 mm plungers with ground cam in the pump also with injectors that have 5x20 tips and .093 lines. Pump is now putting out 400 cc of fuel and I don't know what turbo will work on it. Right now it has a t-04 on it. Does anyone know?
Reply Quote

Re: need some help with turbo size March 19, 2016 11:21AM
A good starter turbo that's cheap I'd go with a 3lm. It's very easy to spool and to stay on top of. The one I bought last spring from scheid was around 600 but had a good sized core charge. And all they want for the core is a 3 in turbo, it doesn't have to be a 3lm
Reply Quote

Re: need some help with turbo size March 19, 2016 12:11PM
Hx50 or s300, the center sections are alot better. 3lm center sections are weak and won't take much. But I guess it depends on your rules.
Reply Quote

Re: need some help with turbo size March 19, 2016 01:12PM
Got a good 3x3 Columbus turbo that would work good. Just rebuilt with no runs on it since. Can ship. $1800obo call or text 419-722-4923


Reply Quote

Re: need some help with turbo size March 19, 2016 12:28PM
HX50 would work good. I used an HX52 on a similar setup, with a little bigger motor. I liked the 52 a lot. Came on strong at about 1800 RPM, and I never burned it up like I did my 3LM.
Reply Quote

Re: need some help with turbo size March 19, 2016 12:45PM
I'll give another vote for an HX-50. I think a good 50 will make more power than a 3LM. More tourque in my experience. We have ran both and I'd skip the 3LM and go with a 50.
Reply Quote

Re: need some help with turbo size March 19, 2016 01:25PM
What size hx50 would work though?
Reply Quote

Re: need some help with turbo size March 19, 2016 01:27PM
Get and s362 $800 and they run really good
Reply Quote

Re: need some help with turbo size March 19, 2016 01:31PM
Can you hear the turbo unlike the t04 and will it do good in 10,000-13,000 lb classes
Reply Quote

Re: need some help with turbo size March 20, 2016 12:04AM
Yes, we run one on a 466ci 12000 altered farm tractor with a rotary pump. Never pulled anything slower then road gear last season. Even turned 2 over on a couple softer tracks
Reply Quote

Re: need some help with turbo size March 20, 2016 11:11PM
Like everyone else said, skip the antique 3LM. Go with with either a S300 based charger like a S362 to S366 or find a HX50/52. Personally I'm a fan of the HX52 with the 16cm exhaust housing, swapped out a 3LM466 that people tout so highly for a HX52 with no other changes on a 466 rotary pump Deere. Went from powering out on the big end to spinning out with almost no smoke.
Reply Quote

Re: need some help with turbo size March 22, 2016 04:51AM
Have 8000 ford, 12mm simms, quick cam in pump, 456 with reground cam and valve reliefs, s366 runs good. But looking for bigger turbo, lots of smoke, pump turned way back. Think something like s400, gt42 what size would work.?
Reply Quote

Re: need some help with turbo size March 22, 2016 02:24PM
A What size s366 are you running 9700?
Reply Quote

Re: need some help with turbo size March 23, 2016 12:29AM
66mm,.91 housing
Reply Quote

Newer Topic Older Topic

Author:

Your Email:


Subject:
Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,776, Posts: 229,946, Members: 3,338.
This forum: Topics: 37,098, Posts: 226,032.

Our newest member Jacklovik2009