806 bolster in 1066 March 23, 2016 02:59PM
How hard of a swap is it to put an 06 bolster in 66 frame rails to get a narrow front? Will the nose cone bolt up?

Re: 806 bolster in 1066 March 24, 2016 03:55AM
you have to shim frame rails

Re: 806 bolster in 1066 March 24, 2016 04:22AM
I know you use a steel plate to shim it, but how thick?

Re: 806 bolster in 1066 March 24, 2016 06:20AM
Measure 1 then measure the other subtract the difference and divide by 2 that will give you the thickness of shims your gonna need....i want to say 1" on each side but dont remember for sure

Re: 806 bolster in 1066 March 24, 2016 11:38AM
1 inch on each side

Re: 806 bolster in 1066 March 24, 2016 02:37PM
I put a 466 in a 706 and used the factory bolster and stock 66 series frame rails, you will need a 1/2 inch plate on each side of the bolster



Edited 1 time(s). Last edit at 03/24/2016 02:37PM by MJM540.

Re: 806 bolster in 1066 March 25, 2016 12:40PM
I have shims that I took out. If interested 317-833-2616

Re: 806 bolster in 1066 March 26, 2016 06:55PM
What would you be asking for them?

Re: 806 bolster in 1066 March 28, 2016 09:16AM
Shot me a text or call

Author:

Your Email:


Subject:


Spam prevention:
Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.
Message:
Website Statistics
Global: Topics: 38,701, Posts: 229,801, Members: 3,329.
This forum: Topics: 37,081, Posts: 225,951.

Our newest member CBeard