IH rockshaft delete

	IH rockshaft delete April 12, 2016 02:07PM
MJM540 Registered: 02/20/2013 Posts: 87	looking at taking the complete rockshaft housing off my 706 and was wondering what all needs to go with it? also someone told me to take the hitch pump out and add a freeze plug in place of the tube going to the filter, is that correct or does that pump stay for any lubrication purpose of the diff components? Any info or pictures would be greatly appreciated Thanks, Mike Reply Quote

	Re: IH rockshaft delete April 13, 2016 03:17AM
AAR Registered: 05/24/2013 Posts: 380	They are correct, the pump does not lubricate anything in the rear end. You can also remove the draft sensing arm from the load shaft while you are at it. Reply Quote

	Re: IH rockshaft delete April 14, 2016 01:02AM
MJM540 Registered: 02/20/2013 Posts: 87	If i remember correctly if you take the top link plate off while the tractors running, there is hy tran raining down on the rear components from the rockshaft cover, what happens to that oil supply raining over everything? will i have to put a lube line or something on? thanks, Mike Reply Quote

	Re: IH rockshaft delete April 14, 2016 01:41AM
Anonymous User	we put fittings in our top covers to keep that oil flow same as original. Reply Quote

	Re: IH rockshaft delete April 14, 2016 04:44AM
MJM540 Registered: 02/20/2013 Posts: 87	Thanks everyone of the tips, i appreciate it very much. Mike Reply Quote

	Re: IH rockshaft delete April 14, 2016 07:24AM
AAR Registered: 05/24/2013 Posts: 380	That flow is coming from the brake valve. Put your fitting in your top cover in about same place and it'll lube the diff Reply Quote

	Re: IH rockshaft delete June 27, 2016 03:12PM
MJM540 Registered: 02/20/2013 Posts: 87	Pulled the top plate off today and i found that there is two (one on each side) small tubes in front of each dowel pins with what looks like rain caps that are spring loaded shut. what do i need to do with those and what is the function? Any help is appreciated. Thanks, Mike Reply Quote

	Re: IH rockshaft delete June 27, 2016 03:31PM
AAR Registered: 05/24/2013 Posts: 380	They are vents for the final drives. Pull them out and discard. If there is no freeze plug behind inner axle bearing they aren't necessary. If plugs are in u can cut a small notch from hole to inside of rear end to vent Reply Quote

	Re: IH rockshaft delete June 29, 2016 10:01AM
Trophy hunter Registered: 09/01/2015 Posts: 27	Anyone know the part numbers for the freeze out plugs that go in the hole where the rock shaft was !!! And the part numbers for the lift housing where the lift arms were. They came factory on a wheatland tractor Reply Quote

	Re: IH rockshaft delete June 29, 2016 12:31PM
AAR Registered: 05/24/2013 Posts: 380	383331R1 for the plugs call a salvage yard and ask for the rear end top cover from a 4366, i think 4386 used it to. if you need the big cast one it's a 385931R92 Reply Quote

Newer Topic Older Topic

Print View RSS

Author:

Your Email:

Subject:

Help information

Spam prevention:

Please, enter the code that you see below in the input field. This is for blocking bots that try to post this form automatically. If the code is hard to read, then just try to guess it right. If you enter the wrong code, a new image is created and you get another chance to enter it right.

Enter code:

Message:

Website Statistics

Global: Topics: 39,873, Posts: 238,782, Members: 3,650.
This forum: Topics: 38,478, Posts: 234,896.

Website Daily and Monthy Hits: http://pulloff.com/webalizer

Our newest member CountryDude