05:31:55pm, Sunday, April 28, 2024
Water injection hose's
|
3man
|
What type of hose do most of you use on your water injection systems. I will be running water and methonal and I'm afraid it might hurt regular hose. Thanks for any advice |
Re: Water injection hose's
|
Registered: 08/28/2014 Posts: 178 |
U need steal braided hose to hold the high psi and the methonal. We use steal braided on are super farms with just plain water and pump lube. |
Re: Water injection hose's
|
Registered: 03/05/2012 Posts: 71 |
Castner has really nice pressed braided lines made up. Nice guys to deal with |
Re: Water injection hose's
|
3man
|
Do you have a number for them? |
Re: Water injection hose's
|
Registered: 04/06/2008 Posts: 263 |
Just got to your local 'Ritter engineering' or 'Parker' store they will make your whatever you want |
Re: Water injection hose's
|
Registered: 08/26/2009 Posts: 60 |
Ross Castner (315) 730-4469 Mike Castner (315) 694-2522 Pre made hoses can be bought from jegs or summit but if your new to this a little direction from a builder might be a good idea! |
Re: Water injection hose's
|
Braided brake line works just fine. Buy it right off the shelf |
Re: Water injection hose's
|
Registered: 07/09/2008 Posts: 103 |
Always just use 3 or 4 an steel braided brake lines. Www.speedwaymotors.Com has them in many different lengths. |
Re: Water injection hose's
|
Another Puller!
|
We had to go to Hyd. 4000 PSI line, braided stainless lines could not take the pressure of the pump. Wish we could've found stainless to take the pressure but could not, sure they are available somewhere, but needed them now! |
Re: Water injection hose's
|
Try grease gun hoses! 1/8 pipe threads, various lengths, work great with high pressure! |
Re: Water injection hose's
|
Registered: 08/14/2013 Posts: 260 |
Did the grease hoses first year out. Went to different nozzles and needed a different hose. Using high pressure hyd lines now. |
Re: Water injection hose's
|
Registered: 12/30/2008 Posts: 275 |
Pre-Assembled Brake, Nitrous & Gauge hose from Aeroquip. Made from braided teflon line. Can get with either straight or 90 degree bends on each end. From a length of 10" up to 50" length. They are pressure tested at 4,000 psi after being assembled at Aeroquip. [www.ulmerracing.com] |
Re: Water injection hose's
|
3man
|
It has hyd hose now but the fittings seem to rust and plug up the nozzels. |
Website Statistics
Global: Topics: 38,640, Posts: 229,706, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.
Global: Topics: 38,640, Posts: 229,706, Members: 3,325.
This forum: Topics: 37,067, Posts: 225,903.
Our newest member JD_8520